Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ WCC: What are you bringing to give away/sell?
Posted by: Jeff Bowlsby Apr 16 2005, 01:43 PM
The WCC is not a swap meet per se, but surely there are a few WCC attendees who have 914 things to pass on to other 914 comrades. I thought this thread might be a good way to connect those that have with those that need something for their 914.
I will have the following available, see me at the WCC or email me before then:
FREE: MPS diagnostics, for anyone with an MPS. 1 per person please....I will have my test equipment with me and would be glad to give your MPS a free evaluation. $25 value. You dont even need to remove it from the car for the tests.
FOR SALE: Misc 914 magazine advertisements. I have about 50 German and a few USA 914 ads available for anyone interested.
FOR SALE: I will have a sample replacement FI, Alternator and Ignition Harnesses for anyone who wants to see them.
Posted by: skline Apr 16 2005, 01:47 PM
I have tons of parts if anyone needs anything. Picked up 4 parts car in the last few weeks. If you need something, I am bringing a full size truck and a trailer. Can haul lots of stuff. I am bringing an engine up for Kevin but have a lot more room.
Posted by: Mueller Apr 16 2005, 01:56 PM
I need a pair of '75/'76 rear tail light assemblies..complete, Euro or U.S. okay...
Posted by: skline Apr 16 2005, 01:58 PM
| QUOTE (Mueller @ Apr 16 2005, 11:56 AM) |
| I need a pair of '75/'76 rear tail light assemblies..complete, Euro or U.S. okay... |
I got some of those, but what is the difference between late and early? I didnt know there was any difference. I actually have several sets. No Euro lenses though, just US.
Posted by: Mueller Apr 16 2005, 02:12 PM
if I am correct, the later versions have metal dividers/reflectors inside, less susceptible to heat damage from the bulbs..........
Posted by: ! Apr 16 2005, 02:15 PM
You can use some of the foil from my anti mind reading helmet......I always have extra for when I get a burn thru.... 
Posted by: jim_hoyland Apr 16 2005, 02:16 PM
I bringing two front hood springs; pair of calipers
Posted by: ! Apr 16 2005, 02:22 PM
Thinking of bringing the vinyl machine and the computer to do race numbers and other stuff....anyone interested?
Posted by: neo914-6 Apr 16 2005, 03:17 PM
| QUOTE ("Z" @ Apr 16 2005, 12:15 PM) |
| You can use some of the foil from my anti mind reading helmet......I always have extra for when I get a burn thru.... |
Magneto...(of Xmen)
Posted by: Carlitos Way Apr 16 2005, 04:18 PM
I'm bringing a couple of near-new Kumho Ecsta tires(195/50/15), a center console in mostly disassembled condition, some trim pieces and an extra targa top. Maybe a set of front calipers. Anything that's not needed in the immediate and foreseeable future, as I will be moving the following week.
Posted by: Carlitos Way Apr 16 2005, 04:25 PM
| QUOTE ("Z" @ Apr 16 2005, 12:22 PM) |
| Thinking of bringing the vinyl machine and the computer to do race numbers and other stuff....anyone interested? |
That'd be swell..
Posted by: rick 918-S Apr 16 2005, 04:29 PM
If anyone has a rust free and straight rear lid I'm in the market.
Posted by: boxstr Apr 16 2005, 04:59 PM
I will be bringing all of the stuff I sell at http://www.camp914.com including the GTS seats, LeMans and Nurburgring. Any special requests I will try and bring.
I am bringing a rear trunk holder for the targa top for ?? .
CCLINSWAPMEETFEVER
Posted by: drew365 Apr 16 2005, 05:37 PM
Rich, I have a nice rear lid with one crack in the paint that is just showing some surface rust through the crack, otherwise it is solid. I can bring it if you want but how will you get it home?
I also have a nice fiberglass front lid and a new set of Weltmeister poly front bushings still in wrapper. Anyone interested?
Posted by: neo914-6 Apr 16 2005, 06:45 PM
Free front sway bar body mount screws (a few sets available) I bought a box from McMaster Carr per Engmans specs for his mount:
Metric Hi-Visibility Blue Hex Head Cap Screw 10.9 Stl,
M8 Sz, 25mm L, 1.25mm Pitch, Fully Thrd
Posted by: SirAndy Apr 16 2005, 07:07 PM
i know i promised someone my old rear reflector + elec. trunk lock.
that was like 2 years ago. i also haven't filed my taxes yet, but that's another story ...
so, if you read this and you suddenly remember that i promised you that reflector thingy AND you plan on attending the WCC, *speak up* cuz brad has some room in his truck ...
Andy
PS: i also still have one set of Mr. Laughlin's trunk schocks that i never gave him back ...
PPS: do i see a pattern emerging here? 
Posted by: bondo Apr 16 2005, 07:11 PM
skline: Do you still have that extra gasket/seal set for a 901? If so, how much $?
Posted by: Mueller Apr 16 2005, 07:15 PM
| QUOTE (Neo914 @ Apr 16 2005, 05:45 PM) |
| Free front sway bar body mount screws (a few sets available) I bought a box from McMaster Carr per Engmans specs for his mount: Metric Hi-Visibility Blue Hex Head Cap Screw 10.9 Stl, M8 Sz, 25mm L, 1.25mm Pitch, Fully Thrd |
can you save an installs worth of those for me??
Posted by: Headrage Apr 16 2005, 07:22 PM
If any body has a front, and even rear sway bar, I would be happy to have you install it and show everyone how well it works. Front sway bar would be GUD.
Posted by: scott thacher Apr 16 2005, 07:24 PM
things i could use
seat belts... i have a spare set somewhere cant find em ( need )
2 black seat bottoms, and 1 black seat back
steel wheel lug nuts i think i am one short
stuff i want but dont need and i will willing to buy you a cheese burger for payment ( McD's dollar menu ) 
a free racing harness it does not need to be perfect but legal is nice
a free carpet set in black
Posted by: Howard Apr 16 2005, 07:29 PM
Bring as much crap as you can to Lancaster. And the Track, we can set up in the Garage. Someone will break something and need it, and we'll all have a bit of time to kill between run groups.
Good place for your vinyl thingy, Mike.
Posted by: carreraguy Apr 16 2005, 07:55 PM
I could use a new rubber seal at the base of the driver's side threshold; mines falling apart from getting in and out.
Posted by: neo914-6 Apr 16 2005, 09:48 PM
| QUOTE (SirAndy @ Apr 16 2005, 05:07 PM) |
| i know i promised someone my old rear reflector + elec. trunk lock. that was like 2 years ago. i also haven't filed my taxes yet, but that's another story ... so, if you read this and you suddenly remember that i promised you that reflector thingy AND you plan on attending the WCC, *speak up* cuz brad has some room in his truck ... AndyPS: i also still have one set of Mr. Laughlin's trunk schocks that i never gave him back ... PPS: do i see a pattern emerging here? |
Are you doing the Gilroy meet and drive with your 914?
Posted by: neo914-6 Apr 16 2005, 09:52 PM
| QUOTE (Mueller @ Apr 16 2005, 05:15 PM) | ||
can you save an installs worth of those for me?? |
done, they'll be at my place...
I can meet you at the next Easy RGruppe meet (first Sat).
Posted by: boxstr Apr 16 2005, 11:00 PM
I will bring the rubber threshold strips. I can bring a factory carpet set that I just removed. I have about 50 seat bottoms, should be a black one in there also seat belts.
CCLINSWAPMEETFEVER
Posted by: rick 918-S Apr 16 2005, 11:50 PM
| QUOTE (drew365 @ Apr 16 2005, 03:37 PM) |
| Rich, I have a nice rear lid with one crack in the paint that is just showing some surface rust through the crack, otherwise it is solid. I can bring it if you want but how will you get it home? I also have a nice fiberglass front lid and a new set of Weltmeister poly front bushings still in wrapper. Anyone interested? |
I'll bolt it on my car and leave mine in the desert. Also early doors!
Posted by: SirAndy Apr 17 2005, 12:14 AM
| QUOTE (Neo914 @ Apr 16 2005, 07:48 PM) |
| Are you doing the Gilroy meet and drive with your 914? |
nope, no 914 for me ...
i'm riding shotgun with brad in his truck so i can take the truck back to the bay area after they locked him up in jail for good ...
Andy
Posted by: carreraguy Apr 17 2005, 12:19 AM
| QUOTE (boxstr @ Apr 16 2005, 09:00 PM) |
| I will bring the rubber threshold strips. I can bring a factory carpet set that I just removed. I have about 50 seat bottoms, should be a black one in there also seat belts. CCLINSWAPMEETFEVER |
Thanks for the strips Craig! See you in Gilroy.
Posted by: Andyrew Apr 17 2005, 12:28 AM
Andy, does that mean i'll never be able to buy the spacers? 
I'll bring... um.. Well asside from my parts as spares (trani, cv's, trailing arms, suspension junk, seats, ext)... nothin really... lol
I could be wagered out of most of it after the event though probably... lol
Drew.. I would be interested in the bushings...
How much for the lid (trunk...)?
Andrew
Posted by: rdauenhauer Apr 17 2005, 12:29 AM
Anyone interested in a set of OE white headlight surrounds? NLA
Posted by: neo914-6 Apr 17 2005, 02:24 AM
| QUOTE (SirAndy @ Apr 16 2005, 10:14 PM) | ||
nope, no 914 for me ... i'm riding shotgun with brad in his truck so i can take the truck back to the bay area after they locked him up in jail for good ... Andy |
I hope you are kidding...
Need your car driven? I will likely drive down in my other German car now that I have two jackstand 914's.
Posted by: ablose58 Apr 17 2005, 02:27 AM
I need a dash top and a targa bar upper pad w/no cracks
Posted by: SLITS Apr 17 2005, 02:32 AM
I'm bringing a bag and Toast. I hope the attendees will fill the bag with money and I'll give Toast away. 
Posted by: Joe Sharp Apr 17 2005, 08:53 AM
Allan I got the sway bar covered, but you have to install mine.
Scott: I got most of the stuff you want covered.
Joe
Posted by: scott thacher Apr 17 2005, 09:30 AM
i am bring a few lock cylinders and extra tumblers if any one needs any locks rekeyed bring them along. this is my free be to all those who are coming.
the main thing i need is seat belts, or no track time... opps i guess since i have not paid track fees i wont get track time any way
i wonder if a 3000 mile drive qualifies for a tech inspection
Posted by: rdauenhauer Apr 17 2005, 10:30 AM
Scott Early or Late? Ive got a set I could bring. 
Posted by: rhodyguy Apr 19 2005, 07:13 AM
the last of those damned vinyl, static cling stickers. this is absolutely the end of them. gettem while they're luke warm.
k
Attached image(s)
Posted by: bondo Apr 19 2005, 10:03 AM
I'll be bringing a set of bus 2.0 heads to sell. Probably not much else due to space constraints.
Posted by: bondo Apr 19 2005, 10:09 AM
| QUOTE (bondo @ Apr 19 2005, 09:03 AM) |
| I'll be bringing a set of bus 2.0 heads to sell. Probably not much else due to space constraints. |
Duh.. I forgot something else quite large that I'll be bringing for sale.. a whole 914!
(73 1.7 FI, salvage title)
Posted by: Verruckt Apr 19 2005, 10:16 AM
| QUOTE (bondo @ Apr 19 2005, 10:03 AM) |
| I'll be bringing a set of bus 2.0 heads to sell. Probably not much else due to space constraints. |
Are those the ones with the Dshaped exhaust ports? I am not going to the WCC, but may very well be interested.
Posted by: jkeyzer Apr 19 2005, 10:29 AM
I am looking for:
(1) rear trunk targa clip (front white one) - I think Craig is bringing one for me.
(1) passenger side outside door handle in good condition
(1) rubber door threshold seal for the driver's side, the bottom one that goes on the car (not the door)
1 or 2 of those square threaded insert things that go in the doors and hold the armrest
Posted by: boxstr Apr 19 2005, 10:41 AM
Jeff I am bringing the targa top holder and I have sets of the rubber seals. I will look for a door handle. I will check on the threaded piece also
CCLINSWAPMEETFRENZY
Posted by: bondo Apr 19 2005, 10:47 AM
| QUOTE (Verruckt @ Apr 19 2005, 09:16 AM) | ||
Are those the ones with the Dshaped exhaust ports? I am not going to the WCC, but may very well be interested. |
Nope. They're roughly equivalent to 1.8 heads, but they fit 94mm cylinders. Not sure what year they switched to the different port design, but these are before then. (they're oval) They MAY have bigger valves than a 1.8, but I don't know.
Posted by: nebreitling Apr 19 2005, 10:58 AM
| QUOTE (scott thacher @ Apr 17 2005, 07:30 AM) |
| the main thing i need is seat belts, or no track time... opps i guess since i have not paid track fees i wont get track time any way |
scott, i've got a driver's side seatbelt i'll give you (gratis, of course) if you need it.
n
Posted by: rhodyguy Apr 19 2005, 11:10 AM
he doesn't want the hassle to ship.
k
Posted by: TonyAKAVW Apr 19 2005, 11:28 AM
While it won't be literally AT WCC, the roller pictured below will be available. Check the classifieds for more details. Its located about 60 miles south of Camarillo.
Link...
http://www.914world.com/bbs2/index.php?act=ST&f=20&t=27139&st=0
-Tony
Attached image(s)
Posted by: andys Apr 19 2005, 11:45 AM
Where/when do you guys plan on giving/selling your 914 stuff. I know it was mentioned that there will not be a swap meet per se.
Andy
Posted by: Jenny Apr 19 2005, 11:46 AM
Anyone with one of those small momo steering wheels & adaptor for cheap? I'll try to dig up a pic of what I want...
Jen
Posted by: MattR Apr 19 2005, 11:57 AM
| QUOTE (scott thacher @ Apr 16 2005, 05:24 PM) |
| things i could use seat belts... i have a spare set somewhere cant find em ( need ) 2 black seat bottoms, and 1 black seat back steel wheel lug nuts i think i am one short stuff i want but dont need and i will willing to buy you a cheese burger for payment ( McD's dollar menu ) a free racing harness it does not need to be perfect but legal is nice a free carpet set in black |
I have a spair pair of seatbelts. They're yours.
Posted by: MattR Apr 19 2005, 11:58 AM
| QUOTE (Neo914 @ Apr 16 2005, 04:45 PM) |
| Free front sway bar body mount screws (a few sets available) I bought a box from McMaster Carr per Engmans specs for his mount: Metric Hi-Visibility Blue Hex Head Cap Screw 10.9 Stl, M8 Sz, 25mm L, 1.25mm Pitch, Fully Thrd |
I need a set if you still have extras! Thanks.
Posted by: Jenny Apr 19 2005, 12:04 PM
it's not a great pic, but Birgit's got the wheel I want. maybe someone can make it out and tell me which wheel it is. Brad thinks it's the Monte Carlo, but he's not sure.
on the momo website, this is similar to what I'm looking for. Any AXers feel free to chime in.
Attached image(s)
Posted by: merrill Apr 19 2005, 12:36 PM
quick thread hijack. Gilroy what and when?
Posted by: bondo Apr 19 2005, 12:51 PM
| QUOTE (merrill @ Apr 19 2005, 11:36 AM) |
| quick thread hijack. Gilroy what and when? |
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=29320
Posted by: morphenspectra Apr 20 2005, 02:39 PM
All orders placed at the WCC will get a 15% discount. We will have headliners, speaker ports, and a used 914 tow bar. James is bringing more, but I am not sure at this time what it is. there is a surprise product there, he only made for the WCC, I am not at liberty to tell.
HIEDI
Posted by: JohnnyX Apr 20 2005, 02:53 PM
Hello- I need a pair of torsion bar protective end caps and the screws that go with them. These are the ones at the front of the car and protect the ends of the torsion bars when you run over things. Lost mine in Tijuana. I will buy them off you at WCC. Thanks, John
Posted by: Headrage Apr 20 2005, 03:45 PM
I could use a drivers side horizontal targa seal.
Posted by: Mueller Apr 20 2005, 03:49 PM
| QUOTE (MattR @ Apr 19 2005, 10:58 AM) | ||
I need a set if you still have extras! Thanks. |
Matt,
talk to your boss??
I could bring the display down to the WCC
Posted by: neo914-6 Apr 20 2005, 04:01 PM
| QUOTE (MattR @ Apr 19 2005, 09:58 AM) | ||
I need a set if you still have extras! Thanks. |
done, maybe I should bring the box..
Posted by: brer Apr 20 2005, 07:36 PM
there is some straight(?) front windsheild trim in my trunk i was going to take out.
its old and used and free.
Posted by: bondo Apr 20 2005, 11:07 PM
If anyone has a defrost rear window, and would rather have a clear one, I have a clear one to trade (I'd like to get a defrost one). Let me know before friday, or I won't bring it.
Posted by: boxstr Apr 20 2005, 11:33 PM
Well I thought that I was going to bring these to WCC 1. Didn't work out. So I am finally bringing them to WCC 2. Products are ready for production but I have not arrived at a price.
So those of you who need a dashpad,or a targa bar pad. I will have one of each for display only at WCC 2.
CCLINDASHESRUS
Attached image(s)
Posted by: boxstr Apr 20 2005, 11:33 PM
Another shot.
Attached image(s)
Posted by: boxstr Apr 20 2005, 11:34 PM
another one..
Attached image(s)
Posted by: boxstr Apr 20 2005, 11:34 PM
And another shot...
Attached image(s)
Posted by: boxstr Apr 20 2005, 11:35 PM
Pic of the targa pad
Attached image(s)
Posted by: boxstr Apr 20 2005, 11:36 PM
Last one..
Attached image(s)
Posted by: nebreitling Apr 21 2005, 06:12 PM
things i may bring to sell, engine stand, Djet parts, alternator, and probably bunches of other stuff i can't remember....
Posted by: plas76targa Apr 22 2005, 12:32 AM
Jenny - I may have that Momo wheel - I just put it in the car with all the other stuff
I also have one tail light assembly for anyone who needs it.
See you at Camarillo
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)