i have seen all the stock wheels avalible, was wondering what else was out there. heres a pic of mine..i want something else
Attached image(s)
hehe good o'l rivieras...what's the width on those?
Do a search on this forum. You'll find this topic gets discussed very frequently and there are lots of responses with pics.
Good luck!
Here's a pic of some Revolution RZX 17x7's
Attached image(s)
Just sold my Pedrini's for 300
Attached image(s)
SLIM pickings....
This get's broought up all the time...Hell, I think I even did once or twice.
There are way of modding certain honda rims, but I'm not a machinist...and don't play one on TV.
For brand new wheels, http://www.ttrsracing.com/revolution.htm and Panasport and a few race only* wheels are available that'll bolt right on.
*3-piece and start at about $350 each
You could re-drill your hubs to a different 4 bolt pattern, but there are other issues to deal with afterwards..
I've always thought it'd be better to convert to 5-lugs and get a set of Boxter rims...
QUOTE (CptTripps @ Apr 18 2005, 08:13 AM) |
I've always thought it'd be better to convert to 5-lugs and get a set of Boxter rims... |
4- lug?
Circle or diamond with steel and or al custom offsets not to much $$$.
Fuchs, possibly some old bbs's, panasports, minilites, all of the custom race companys like kodiak and such, bigger money. Mine with fuchs.....
Attached image(s)
I've been waiting for a set of fake fuchs for two months now. I gess the manufacturer is out, so I'll have to wait until they make a run of them again, someday. I started looking around to see what else will fit the 4 x 130 mount, I stumbled across these on the web yesterday. Made bt ATS...
Attached image(s)
QUOTE (Yoei66 @ Apr 18 2005, 09:20 AM) |
I've been waiting for a set of fake fuchs for two months now. I gess the manufacturer is out, so I'll have to wait until they make a run of them again, someday. I started looking around to see what else will fit the 4 x 130 mount, I stumbled across these on the web yesterday. Made bt ATS... |
Simply put, real ones will cost me more.
I decided to go with the fakes, because they are freshly polished & painted. The package price I got from the local tire store was only slightly more (about $50 bucks) than the sets of used I've seen advertised, plus new lug bolts, plus mounting are in my package. I would have to pay more for a real set after spending time and money on polishing & painting supplies, lugs, and mounting. However I'm still playing the waiting game.
Does Panasport make a 15x7 that fits 4 bolt pattern with proper offset ? I was thinking of giving them a call.
I just called Panasport last week.
15x6 street wheels (comes with center caps) +30 offset 264.00. They can do 15x7, they have to be machined (so I was told) and they are their racing wheels - not for road use. Offsets from +25 to +40. You would probably want the +40 to fit in your wheel wells, they run $310.00
What about the BRM flat 4 wheels, 4 spoke jobbers for about $110. Look a little funky but might be that different look you are after.
QUOTE (Travis Neff @ Apr 18 2005, 10:27 AM) |
I just called Panasport last week. 15x6 street wheels (comes with center caps) +30 offset 264.00. They can do 15x7, they have to be machined (so I was told) and they are their racing wheels - not for road use. Offsets from +25 to +40. You would probably want the +40 to fit in your wheel wells, they run $310.00 What about the BRM flat 4 wheels, 4 spoke jobbers for about $110. Look a little funky but might be that different look you are after. |
except for ATS, Revolution, and Panasport, i don't believe there are any companies currently making wheels for our cars...
there were a few more companies in the 70's and 80's though -- every once in a while something will come up on ebay.
anyone get a pic of the wheels on herb meeders car at the SD dinner? those were wierd....
he said they were 'haney' wheels
I thought someone had a website that listed/showed all the wheels for the 914.
If not we should all post a picture of ours and nail it somewhere here for referance.
Paul
QUOTE (Yoei66 @ Apr 18 2005, 08:20 AM) |
I've been waiting for a set of fake fuchs for two months now. I gess the manufacturer is out, so I'll have to wait until they make a run of them again, someday. I started looking around to see what else will fit the 4 x 130 mount, I stumbled across these on the web yesterday. Made bt ATS... |
sum mo'
pedriniFuchs mahle
Empi 8 spoke American Racing 'libre' steelie eww.. riv's ATS
HRE/Panosports
centerlines
momo
enkeis
revo's
and...and wtf is this?
Minilites are available for our 4 lug cars, $310 ea including centercap and lugs for
a 15 x 6.5". @ http://www.minilitewheels.com/
PS takes about 6 to 8 weeks to have a set made
Backspace on the BRM's are 3 5/8" so that should give you a positive offset of 1.875" My enkeis have a 20mm offset so the postiive offset (from the back of the hub mount)is 1.97 - these BRM's might be a decent fit.
A little fender rolling might be in order, I can fit 205x50's on empis on the rear with a little tugging of the fender, 195x60's on westerns/dan gurney wheels with the same amount of room.
These are ATS, 5.5x15 with 205/60's, stock fenders.
Attached image(s)
7x15 Revolutions on my AX car. Not cheap, $999 per set. Not sure if that includes bolts, plus shipping.
Attached image(s)
Who's got a weight on the Revolutions. 15 x 7 ?????
That's the bad news. About 6 lbs. per wheel more than 2.0 Fuchs.
I put a bunch of fiberglass on to lose weight, then added 24 lbs of unsprung weight! Hope money spent on wheels and money spent on f.glass aren't cancelling each other out.
I was advised by a very experienced 914 autocrosser that 7's would make more difference than any other improvement. The 205/50 V. Racers sure seem to like them better. Sidewalls not all pinched in like on 5.5 Fuchs. Yesterday was first time out and it was wet so hard to tell yet if I gained or lost.
i hear the 17x7 revs are heavy mofo's
These guys in Japan sell Fuch replicas and some others with not ideal offsets:
http://www.flat4.co.jp/drive/4lug/914/914.html
QUOTE (Aaron Cox @ Apr 18 2005, 12:03 PM) |
i hear the 17x7 revs are heavy mofo's |
These were built by Custom Racing Specialties in California back in the 80's with an off-set specific to the 914. Unfortunately they're out of business now.
Attached image(s)
who wants to put a webpage together with all the 4 lug wheels known to fit 914s?
Rusty has one on his website, but it hasn't been updated lately. There is another one here too.
Oh yeah, don't the forget the Western
Attached image(s)
Someone found these awhile back - they appear as if they should fit. Lightweight rim at a pretty good price. Here's the thread on it:
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=27522
Demick
unfortuneatly they are in austrailia....
QUOTE (Mueller @ Apr 18 2005, 11:08 AM) | ||
yep....I want to say 22 a pop....do I care? not really, it's for a street car and I know with the extra material they'll have the strength to take the abuse of the road..............it's all a trade off...one thing for another.... |
in all fairness for the Revolution wheels...they are designed for Rally racing, not your typical and less abused road racing/auto-x venue
Riverman, curious what tire combination you are running with those 17x7 rev's. Looks like you have original fenders without flares.
QUOTE (guywan914 @ Apr 18 2005, 05:39 PM) |
Riverman, curious what tire combination you are running with those 17x7 rev's. Looks like you have original fenders without flares. |
My scale said 13+ lbs. for fuchs, 19+ for Revolution 7x15.
I've got a set of these if your interested. Brand new rubber. The paint can be stirpped off and the wheels are silver underneath.
Eric
Attached image(s)
QUOTE (Eric Taylor @ Apr 18 2005, 05:57 PM) |
I've got a set of these if your interested. Brand new rubber. The paint can be stirpped off and the wheels are silver underneath. Eric |
Mueller,
it is threads like this that make me want to PUKE
We know what needs to be done.
B
Your right muller it's totally different, because I put up the wrong picture. I'll change it . Those are the rims I want for my 93 audi 90. They are pertty
Eric
And this is why I went five lug. No 4 lug wheels looked that great and none were big enough to fill gt flares. Although these looked pretty good
QUOTE (Brad Roberts @ Apr 18 2005, 06:09 PM) |
Mueller, it is threads like this that make me want to PUKE We know what needs to be done. B |
Forgot the pic. They dont look 4 lug but they came off a four lug car(not mine)
Attached image(s)
I like the rivieras.. anyone know anything about them?
QUOTE (jgiroux67 @ Apr 18 2005, 06:16 PM) |
And this is why I went five lug. No 4 lug wheels looked that great and none were big enough to fill gt flares. Although these looked pretty good |
QUOTE (Hammy @ Apr 18 2005, 06:19 PM) |
I like the rivieras.. anyone know anything about them? |
QUOTE (Mueller @ Apr 18 2005, 05:22 PM) | ||
your kidding right??? Riv's came about to give cheap bug owners a way to think they have 5 lug Fuchs......too skinny and most have a crappy offset to put decent size tires on them.....Rivs are good to put on a 914 that you are trying to get rid of.... |
More ATS
Attached image(s)
hammy, look at the first post thats my rivieras. i have every type of sock wheel at work. including american racing wheels..on this thread..i can go 5-lug easily, i have a couple cust. that will give me a front conversion,but i have to still come up with 5-lug rear spindals and wheels and tires...i have my set of rivieras done painted and with brandnew kumo tries on them..yes i cuould drill them but dont want to , our 914 racer we put 914 stock caliper with a 911 drilled and vented rotor on rear , mach. a spacer between caliper ,with o-ring slots and longer pad pins. works great. has a 930 turbo front brake setup
aaron wrote: wtf are these????
those look like Centerline rims....damn ugly on a 914.....they look halfway decent when about twice as wide....Champ 500s I think???
I've seen those on a 930's, much better looking .....
QUOTE (guywan914 @ Apr 18 2005, 07:39 PM) |
Riverman, curious what tire combination you are running with those 17x7 rev's. Looks like you have original fenders without flares. |
QUOTE (Mueller @ Apr 18 2005, 06:58 PM) |
aaron wrote: wtf are these???? those look like Centerline rims....damn ugly on a 914.....they look halfway decent when about twice as wide....Champ 500s I think??? I've seen those on a 930's, much better looking ..... |
My 8" x 15" fake Centerlines.
Attached image(s)
my old wheels...
Attached image(s)
QUOTE (Hammy @ Apr 18 2005, 08:25 PM) | ||||
I just think they look.... nice I don't really mind if they're fuchs look-a-likes. Then what else is out there besides going 5 lug? |
well ,hell i think my wheels will look better than and on this thread,after i get dont polishing them and sanding off rough edges,they look nice but no-one has shone me nothing i havent seen.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)