Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Shift linkage
Posted by: hseymore1 Oct 3 2016, 12:21 PM
Although this is not my first complete 914 restoration, this is the first time I am having this problem. I am at that point where I have the engine /trans back into the car. All systems go the engine runs great. I can fell it notch into all gears except first. Yet when I shift from under the car manually selecting first it notches in and hold. When I shift from in the car using the shift lever it wants to jump of first I have followed the shop manual instruction to the letter to no avail...Any suggestions out there.
HS
Posted by: stugray Oct 3 2016, 12:24 PM
QUOTE(hseymore1 @ Oct 3 2016, 12:21 PM) 
Although this is not my first complete 914 restoration, this is the first time I am having this problem. I am at that point where I have the engine /trans back into the car. All systems go the engine runs great. I can fell it notch into all gears except first. Yet when I shift from under the car manually selecting first it notches in and hold. When I shift from in the car using the shift lever it wants to jump of first I have followed the shop manual instruction to the letter to no avail...Amy suggestions out there.
HS
Tailshift or side shift?
Last time I replaced the side shift bushing in the rear console, I put it in backwards and it blocked the linkage from going back all the way.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)