Printable Version of Topic

Posted by: Mikey914 Oct 18 2016, 03:08 PM

A part I made by request but the requestor never followed up. Not sure where he went, hope he's ok, but sent me a few items to work on. Made this but couldn't remember where it went.

$2.50 + shipping

Add this in to the Door clips and it would ship for free also !


Attached thumbnail(s)

Posted by: Mikey914 Oct 18 2016, 03:10 PM

One more. these are not flimsy either, about 1mm thick


Attached image(s)

Posted by: pete000 Oct 18 2016, 03:18 PM

What does a ECU adjuster adjust?

Posted by: N_Jay Oct 18 2016, 03:24 PM

In for 2 Add them to my clips.

EDIT:
Roll that back to one, since I only have one D-Jet ECU.
The other ECU is a L-Jet

Posted by: N_Jay Oct 18 2016, 03:24 PM

Mixture

Posted by: Mikey914 Oct 18 2016, 03:25 PM

It deals with the fuel control to some extent. I've never touched it but it's missing on both of my cars.

Posted by: euro911 Oct 18 2016, 03:25 PM

Wow, you're right, Mark

Posted by: Mikey914 Oct 18 2016, 04:09 PM

Yes, yours is missing completely!

Posted by: pbanders Oct 18 2016, 04:17 PM

Idle mixture. It does not affect the mixture when the throttle is open more than a couple of degrees (e.g. part or full-load). Some early ECU's lacked the adjuster, and the idle mixture was fixed by the ECU.

Posted by: 75914-L20C Oct 18 2016, 07:20 PM

Which ECU is this for - D-jet, L-jet, or both?

Posted by: 914Sixer Oct 18 2016, 07:22 PM

D-Jet only. 72 On.

Mark put me down for 2.

Posted by: mankowski Oct 18 2016, 10:42 PM

+1, thanks!

Posted by: 914_teener Oct 18 2016, 11:15 PM

Idle mixture only.......whoops...never mind ...see Brad answered that.

Posted by: Kansas 914 Oct 19 2016, 07:30 AM

I would need one - please add to the 2 sets of door clips - thanks as always - cheers!

Posted by: Mikey914 Oct 20 2016, 03:41 AM

PMs sent to all
Thanks,
mark

Posted by: 914four Oct 20 2016, 09:52 PM

Please add one.

Kelvin