I have some pictures of the rubber trim I need. I bought from you new T-Top windshield trim that is installed and the rubber door squeegee trim I need to replace when I get the change. From these pics you will see the trim I need. Don't mind the rust, the car will get bodywork some time next year. I got it in this shape. If you can give me links from your site on the rubber trim I need please do so I can start working on ordering it before the snow comes.
I thought these pictures would help.
Again, forgive the rust. The last owner had it painted without rust being addressed. This issue will be addressed little by little before it is repainted. I think most VW and early Porsche guys understand rust;)
$34. each ... click the link:
http://shop.914rubber.com/914-Inner-Door-Seal-Set-914IDS.htm?categoryId=-1
Correct I can see the inner door seal and the vertical targa seal
http://shop.914rubber.com/914-Vertical-Targa-Seal-Set-of-2-914VTSS.htm?categoryId=-1
The outer scraper seal is too short if you need the late door end caps
http://shop.914rubber.com/914-Late-door-end-cap-set-left-and-right-914LDEC.htm?categoryId=-1
If to are needing the early you probably have enough there.
Sorry thought I dropped you a
PM on the way out the door this morning.
If you drop me a
PM with your number I'll call tomorrow to walk you through the list.
Thanks
Mark
Thanks for checking in. Scott is in the office 9-5 so the 855-914-GUYS number usually goes right to him, so if you need to you can reach someone directly most of the time.
Do the scrapers too. They're inexpensive and it's easier to do the whole package at the same time. The one pictured is way short on the forward end.
I'll also drop you a call. I thought you may want the door end cap that is missing. Really ties it all together nicely. Your should look something like this if it's a late.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)