Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Sail vinyl install

Posted by: tomh Nov 16 2016, 03:45 PM

Just ordered sail vinyl from 914 Rubber, I need a quick rundown on what and how everything gets removed to do this.
I don't want to just tear into this job, looks like things could get @&$& up if not careful.

Posted by: rmdinmd Nov 16 2016, 03:51 PM

try this link.

http://www.914world.com/bbs2/index.php?showtopic=14625&st=0

Posted by: Mikey914 Nov 16 2016, 04:12 PM

These are precision cut. Make sure the back is going to be tucked under the chrome. The base is the critical area.
The unexposed edges are longer, but not much.

Posted by: stevegm Nov 16 2016, 04:29 PM

QUOTE(Mikey914 @ Nov 16 2016, 05:12 PM)

These are precision cut. Make sure the back is going to be tucked under the chrome. The base is the critical area.
The unexposed edges are longer, but not much.

What glue do you recommend Mark?

Posted by: tomh Nov 16 2016, 06:58 PM

QUOTE(rmdinmd @ Nov 16 2016, 01:51 PM)

try this link.

http://www.914world.com/bbs2/index.php?showtopic=14625&st=0

Great info here

Posted by: Mikey914 Nov 17 2016, 12:51 AM

QUOTE(stevegm @ Nov 16 2016, 02:29 PM)

QUOTE(Mikey914 @ Nov 16 2016, 05:12 PM)

These are precision cut. Make sure the back is going to be tucked under the chrome. The base is the critical area.
The unexposed edges are longer, but not much.

What glue do you recommend Mark?

Locktite 200 medium grip works well.

Posted by: Big Len Nov 17 2016, 04:58 AM

You can also use 3M 90 spray adhesive two years ago. No problems.

Posted by: Porschef Nov 17 2016, 05:13 AM

QUOTE(Big Len @ Nov 17 2016, 05:58 AM)

You can also use 3M 90 spray adhesive two years ago. No problems.

Right on, Len. Same here, 3 yrs.

Posted by: Mikey914 Nov 18 2016, 01:56 PM

3M is great also, sometimes hard to find the 90.