Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Powder coating in SoCal- Shout out to Young Gun
Posted by: Boomingbeetle Nov 18 2016, 06:40 PM
Last week I dropped off this mess of greasy un-cleaned engine tin and misc parts. Sam at Young Gun quoted me $200 to bake all the crud off and have it coated. The shop looks like a tornado ran through it but the finished product looks fantastic!
Young Gun Performance Coatings
10611 Pullman Ct,
Rancho Cucamonga, CA 91730
(909) 944-4156
Posted by: Boomingbeetle Nov 18 2016, 06:41 PM
Posted by: G e o r g e Nov 18 2016, 06:42 PM
Yeah definitely want the Lemfoerder.
Finished up my tie rods, new sway bar bushings, torsion bar adjustments, and did a home DIY alignment with a ruler and strings. Drove the car and seems to handle better and no shakes at speed. So I did something right!
Will find out further tomorrow at an autocross...
[attachmentid=581639]
Address? contact number?
Posted by: Boomingbeetle Nov 18 2016, 06:42 PM
Threads look great, all threaded holes were plugged
Posted by: Boomingbeetle Nov 18 2016, 06:43 PM
Posted by: Boomingbeetle Nov 18 2016, 06:44 PM
Posted by: Boomingbeetle Nov 18 2016, 06:45 PM
Posted by: Boomingbeetle Nov 18 2016, 06:47 PM
[quote name='G e o r g e' date='Nov 18 2016, 04:42 PM' post='2424601']
[attachmentid=581639]
[/quote]
Address? contact number?
[/quote]
Young Gun Performance Coatings
10611 Pullman Ct,
Rancho Cucamonga, CA 91730
(909) 944-4156
Posted by: Boomingbeetle Nov 18 2016, 06:54 PM
Last pic for now.
Posted by: mepstein Nov 18 2016, 09:13 PM
That's actually sort of pricy for not many pieces.
My local place isn't fancy but $275 got me this:
Attached thumbnail(s)
Posted by: Boomingbeetle Nov 18 2016, 10:28 PM
That's actually sort of pricy for not many pieces.
My local place isn't fancy but $275 got me this:
That's a great deal too. I was willing to take a shot, I went to 3 other places and the cheapest offer I got was $300. I was just happy with the turnaround time and the fact that I didn't have to clean anything. Some of those parts were in really sad shape, now they look awesome! I know powder is cheap, most places have a $250 or 350 minimum no matter how many pieces just to do the work
Posted by: 396 Nov 18 2016, 11:31 PM
[quote name='Boomingbeetle' date='Nov 18 2016, 05:47 PM' post='2424608']
[quote name='G e o r g e' date='Nov 18 2016, 04:42 PM' post='2424601']
[attachmentid=581639]
[/quote]
Address? contact number?
[/quote]
Young Gun Performance Coatings
10611 Pullman Ct,
Rancho Cucamonga, CA 91730
(909) 944-4156
[/quote]
Great info. Price difference, unfortunately we live in the LA / California where everything is regulated the the hilt.
Posted by: mepstein Nov 19 2016, 05:43 AM
[quote name='396' date='Nov 19 2016, 12:31 AM' post='2424699']
[quote name='Boomingbeetle' date='Nov 18 2016, 05:47 PM' post='2424608']
[quote name='G e o r g e' date='Nov 18 2016, 04:42 PM' post='2424601']
[attachmentid=581639]
[/quote]
Address? contact number?
[/quote]
Young Gun Performance Coatings
10611 Pullman Ct,
Rancho Cucamonga, CA 91730
(909) 944-4156
[/quote]
Great info. Price difference, unfortunately we live in the LA / California where everything is regulated the the hilt.
[/quote]
Good point. Newark Delaware is probably a lot cheaper to get things worked than LA. We don't even pay sales tax.
Posted by: 76-914 Nov 19 2016, 08:04 AM
A good deal in California is.............finding someone that will do what they said they would do. 
Posted by: bdstone914 Nov 19 2016, 09:13 AM
A good deal in California is.............finding someone that will do what they said they would do.
I have a sandblaster and powder coater who is probably cheaper but quality and dependability count for a lot. I have used ones where no common sense is used and they stick parts together based on how they hang the parts for painting. I also get good prices as I have the parts in satin black and have him add my parts to larger batches. If they have to do a special color or run a small batch it cost them more. The oven he has will easily fit a whole car. Cost a bit in electricity to heat that to 400 degrees.
If you like it and are happy that is all that matters.
Posted by: kid914 Nov 19 2016, 02:06 PM
Last pic for now.
I love the hammered finish......
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)