Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 6 shift rod

Posted by: rgalla9146 Nov 30 2016, 04:37 PM

Is it possible to remove the tunnel shift rod from an original 6 with the engine in the car ?
Converting to side shift.

Posted by: Perry Kiehl Nov 30 2016, 04:41 PM

IIRC, yes

Posted by: gms Nov 30 2016, 04:55 PM

Don't be afraid to destroy the front rod while removing because it is the same as the -4 so there are a bunch of them out there.

Attached Image

Posted by: rgalla9146 Nov 30 2016, 06:58 PM

QUOTE(gms @ Nov 30 2016, 05:55 PM)

Don't be afraid to destroy the front rod while removing because it is the same as the -4 so there are a bunch of them out there.

Attached Image

Good point Glenn.
But if that's necessary to remove it, it seems unlikely that the side shifter piece can just be slid in.
Is the cup on a early tunnel piece removable ? ....roll pin ?