Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ stiffening templtes ore dwg files

Posted by: nick1973 Dec 5 2016, 04:58 AM

Hi im looking to make some stifferning templates for my 914 for both the chasiss and the trailing arms I know i can buy these but im in the uk so the postage is killing them has any on got any drawinsg or autocad files that i could have so i can get them cut out over here and get on with my rebuild

thanks

Posted by: maf914 Dec 5 2016, 07:48 AM

I have no cad files for stiffening pieces, but you may find Tygaboy's thread interesting. See post #32 for inner long stiffening.

http://www.914world.com/bbs2/index.php?showtopic=296900&st=20

Posted by: bulitt Dec 5 2016, 08:13 AM

Cardboard, scissors. Done all the time.

Posted by: nick1973 Dec 5 2016, 08:40 AM

QUOTE(maf914 @ Dec 5 2016, 05:48 AM)

I have no cad files for stiffening pieces, but you may find Tygaboy's thread interesting. See post #32 for inner long stiffening.

http://www.914world.com/bbs2/index.php?showtopic=296900&st=20

Cheers ive already done the inner cills but like the idea of the small hoop over the fire wall
looks like ill be carboning the cils too now ,,,,,

Posted by: nick1973 Dec 5 2016, 08:41 AM

QUOTE(bulitt @ Dec 5 2016, 06:13 AM)

Cardboard, scissors. Done all the time.

I know im just been lazy and wanted to get my local laser cutting place to cut them out but look like thats what il be doing

Posted by: mb911 Dec 5 2016, 04:58 PM

QUOTE(nick1973 @ Dec 5 2016, 06:41 AM)

QUOTE(bulitt @ Dec 5 2016, 06:13 AM)

Cardboard, scissors. Done all the time.

I know im just been lazy and wanted to get my local laser cutting place to cut them out but look like thats what il be doing

I just made templates. And then drilled them.. If I were going to compete with mad dog on those I would do a cad drawing but I am not..