Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 944 cv bolt onto stub axel
Posted by: tazz9924 Dec 6 2016, 03:26 PM
I was told the other day that 944 cvs can be modified for stock stub axles. i understand they're a bit thicker and requires machining to get them to fit on the axle but, how close are the bolt holes and what is required to get them to fit on the stub (i only have to worry about the outer cv as i have subaru inners)
Posted by: SirAndy Dec 6 2016, 03:35 PM
QUOTE(tazz9924 @ Dec 6 2016, 01:26 PM) 
I was told the other day that 944 cvs can be modified for stock stub axles.
Not exactly ...
http://www.914world.com/bbs2/index.php?showtopic=80641
Posted by: North Coast Jim Dec 6 2016, 03:59 PM
QUOTE(tazz9924 @ Dec 6 2016, 04:26 PM)
I was told the other day that 944 cvs can be modified for stock stub axles. i understand they're a bit thicker and requires machining to get them to fit on the axle but, how close are the bolt holes and what is required to get them to fit on the stub (i only have to worry about the outer cv as i have subaru inners)
Porsche just re-released the entire axle shaft for our 914's. I bought 2 of them and are now installed in the car. No need to look for work a work around. Cost by the way was $300/each
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)