I'm having trouble adjusting the window in a late door.
Before I changed the delrin bushings, the front of the window didn't go quite to the top of the cap on the triangular window, there was a small gap between the window and the seal.
Now that I've changed them, the gap has increased to 1/4 of an inch at the front, with a corresponding gap between the window and the seal. The back is OK.
The top's fit is fine and te triangular window height is fine.
I thought I could reposition the bracket that the roller rides in, but when I do - the roller pops off the bracket it's attached to.
What adjustment am I missing?
Thanks
Yes the search function is not as intuitive as you would like. However I did detail my install of the triangle window and some of the install manual on post 21
http://www.914world.com/bbs2/index.php?showtopic=230572&hl=Triangle+window+seal+B.B
I hope this is of help
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)