Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ After years of less than adequate illumination on dark nights, let there BE LIGHT! Flat panel, low voltage LEDs...

Posted by: Joe Bob Dec 17 2016, 10:00 PM

Attached image(s)

Posted by: timothy_nd28 Dec 17 2016, 10:12 PM

Posted by: whitetwinturbo Dec 17 2016, 10:18 PM

..........just like Brue said ............ Blinded by the light

Posted by: Joe Bob Dec 17 2016, 10:27 PM

Parts ran me about five bucks.

All eBay purchases. Hand made panel (scrap), 20 piece rocker kit (2.97). LEDS (2.50)....rattle can paint, scrap wiring, junk drawer wiring, fused and head scratching.

Also put one panel in trunk and engine bay....

Posted by: Joe Bob Dec 18 2016, 12:07 PM

20 for 8 bucks delivered.
http://www.ebay.com/itm/281709521115?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Attached Image

Posted by: timothy_nd28 Dec 18 2016, 02:58 PM

FWIW, I would of wired it to the back bolster light switch, so the lights come on when the door opens and they also come on when you manual slide the switch.

Posted by: Joe Bob Dec 18 2016, 03:07 PM

If I still owned a 914 that would be a good idea. The pic is of my 911....

Ease of wiring dictated routing it under the dash. Switches, hot wires, LEDs etc. Saved a lot of wire and time.

Posted by: Mikey914 Dec 18 2016, 03:14 PM

Sorry what's this thread about, I can't stop looking at the avatar

Posted by: Joe Bob Dec 18 2016, 03:16 PM

Are you the rubber guy? Can you do 911 cabriolet seals? They be hella pricey.....

Posted by: sixnotfour Dec 18 2016, 04:50 PM

SANDBOX is his middle name

Posted by: Chris914n6 Dec 18 2016, 05:44 PM

Losing your flip flops at night?

I have the same plan for trunk(s) lights with a mercury switch.