Printable Version of Topic

Posted by: Mikey914 Dec 22 2016, 05:19 PM

We are actually in the process of doing the shift knobs with the correct width graphics. Everyone except OEM is using the wide lettering ( we used to ), we are in the process of redoing these, but have to go back to press on these.

As another thread came up about the knobs coming off I did a few of thes eup wth black set screws. Who wants one! They are not perfect (I'll post some pics of blemishes) but are definitely daily driver quality. Bet yet set and forget I couldn't twist or pull off.

With the other thread that came up and the frustration I've had with the washers, I figured I's offer a few up. See if you can see the old ones in the picture.

When the new ones are perfected they will be $89 without the set screw.

So for $29.99 less the $8 for the crush gasket you are really getting a better set up for


Attached thumbnail(s)

Posted by: Mikey914 Dec 22 2016, 05:23 PM

Close up pic as some are dusty.


Attached thumbnail(s)


Attached image(s)

Posted by: beech4rd Dec 22 2016, 07:48 PM

I'd like one. How do we order?

Chris

Posted by: Mikey914 Dec 22 2016, 07:53 PM

Just post up here and I'll forward info.

Posted by: malcolm2 Dec 22 2016, 08:00 PM

put me down for 1..... NOT the one with R on the right.

Posted by: Ansbacher Dec 22 2016, 08:26 PM

I'll take one. Reserve one for me. Ditto on the "not the one with the R on the right".

Ansbacher
Seminole, FL 33772

Posted by: Mikey914 Dec 23 2016, 01:12 AM

PMs sent.
Don't worry I'll the R on the right is 911. It also is without set screw.

Posted by: maf914 Dec 23 2016, 06:46 AM

Mark, I'll take one, 914 pattern. Thanks.

Posted by: 914Sixer Dec 23 2016, 07:32 AM

I need one.

Posted by: cary Dec 23 2016, 09:29 AM

Set two aside for me ................

Posted by: Chris H. Dec 23 2016, 10:25 AM

Hey I might want that one with the R on the lower right for $30! Subie pattern. Could you add a set screw to it?

Posted by: jesse7flying Dec 23 2016, 10:56 AM

I'll take one please. Thanks
Jesse

Posted by: scallyk9 Dec 23 2016, 11:29 PM

Please add me to the list. Payment?

Posted by: GeorgeRud Dec 25 2016, 10:00 AM

Are you going to make more with the 911 (915) shift pattern? I would think that might be a reasonable choice for 911 owners (or for those of us that are running a 915 trans in our 914s).

Posted by: walterolin Dec 25 2016, 10:37 AM

One.

Thanks
Olin

Posted by: walterolin Dec 25 2016, 10:37 AM

Double

Posted by: gene3151 Dec 25 2016, 02:29 PM

I would like to get one.

gene

Posted by: Mikey914 Dec 25 2016, 06:21 PM

Yes can do a few up. The problem is that we have been having to hand polish the crystals and only 1 out of 10 are good enough to be 1st run quality. This is also why the 1st run quality ones will be $85.
I can do you one up. What level of quality do you want?

Posted by: simonjb Dec 25 2016, 06:27 PM

I'll take one please
Thanks

Posted by: seandog122 Dec 28 2016, 12:55 PM

Ill take one too