Had some free time over the Holidays and wandering the internet I found out that ATS has re-released/made available again the 914/VW wheel of years gone by. I had a set on our first 914 and thought they were stunning. Got 205-60's under the std lip (Ok a slight roll of the rear fender lip was required on one side). A BIG shout out to wheel disti's to make these available here in the US again. A couple of pics of our old 914 a '74 1.8 and a capture of the new wheel off the ATS Europe site. If the price was right I would but a set.
Our latest project is a '74 2L, red in color with black accents all around. These wheels would really set it off nicely.
Attached image(s)
Attached File(s)
ATS_Wheels.pdf ( 78.65k )
Number of downloads: 58
I've always liked the ATS four-lug wheels!
--DD
http://www.csp-shop.com/cgi-bin/cshop2/front/shop_main.cgi?func=det&wkid=841933898046&rub1=Wheels%20%2F%20Brakes&rub2=Wheels%2CWheels%204%2D130&artnr=11411a&pn=0&sort=0&all=
They look much better all aluminum vs the painted look IMHO.
They aren't exactly cheap either.
76 project / parts car I picked up over thanksgiving has a set with the center caps. I like the looks of them.
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)