Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Which gaskets for 944CV joints

Posted by: john77 Jan 11 2017, 01:52 PM

Anyone know which gaskets work best between the 944CV joint to the stub axle on a 5 lug conversion?

Last time I did this I got 911 CV Joint Gaskets, (late 1975-84) Part #: 923-332-297-00-M30 from the bird and they didn't fit properly, so I ended up putting the old ones back on. This time I'm trying to not be so lazy, especially as my engine is now clean and I don't want grease centrifugally sprayed all over it.

John

Posted by: 914Sixer Jan 11 2017, 06:24 PM

That is the gasket I am going to run but I am using 911SC stubs and hubs. I will put one up to the test tomorrow with the stub and CV.

Posted by: porschetub Jan 12 2017, 12:29 PM

I'am running no gaskets and have no grease coming out ....or is it more to keep dirt out

Posted by: john77 Jan 12 2017, 03:44 PM

Ended up ordering part 901-332-297-00-M260. Let's see if those work. Luckily at $2.50 each it can be a mistake I can live with