Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Floor Pan removal question
Posted by: Nacho Jan 24 2017, 08:31 PM
I hate to do this but I've but been searching for days now. Does someone know of a thread that helps or describes the removal of the floor boards? Specifically the more troublesome areas.
Much Thanks in advance!
Posted by: mepstein Jan 24 2017, 09:33 PM
Removal is usually about removing the tar and then cutting out the rusty part to good metal. It's the replacement that gets all the attention in the threads.
Posted by: Frankvw Jan 25 2017, 01:27 PM
Hi Nacho, there are several topics on the forum about it, and also in some of the restoration threads.
A nice pic of McMark in an older post shows some more difficult areas (since you asked that)
http://www.914world.com/bbs2/index.php?showtopic=150548&hl=
In case you take out the floors and rockers are bad, or are removed as well, make sure to brace the car to hold integrity (also many topics about that)
Good luck, keep us posted with pics, interesting work ahead !
Posted by: Nacho Jan 25 2017, 09:47 PM
Hi Nacho, there are several topics on the forum about it, and also in some of the restoration threads.
A nice pic of McMark in an older post shows some more difficult areas (since you asked that)
http://www.914world.com/bbs2/index.php?showtopic=150548&hl=
In case you take out the floors and rockers are bad, or are removed as well, make sure to brace the car to hold integrity (also many topics about that)
Good luck, keep us posted with pics, interesting work ahead !
Thanks Frankvw
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)