The 16x6's I had on the car were (are) genuine Fuchs, et36 w/ 205/50-16 Falken tires all around. They looked pretty good but I've seen a few narrow body 914's on 7's and figured the Euromeister reps are an inexpensive set to try it out. I also asked a few people which tire size they ran on their 16x7's without modifying the rear fenders and I got mostly 195/45-16, 195/50-16 and 205/50-16... but I saw some pics of Chris Campbell's 914 on 16x7 w/ 205/45 Hoosiers and I fell in love. It sat SO perfectly. Deeper wheels w/ Meaty tires yet still small enough to fit under stock rear arches (with mild modification). So, I got some Toyo R888R's in 205/45-16 and had them mounted and balanced this morning, swapped them on and took it for a spirited loop around my neighborhood. I would like to lower the rear of my car a bit more to get the tire to just tuck but even coming in/out of my driveway (where the tire tucks up in the fender while on an angle), no contact. It was CLOSE like less than 2mm to the fender lip so I just put a towel between the tire and the fender and gently (but with some brute strength) pulled outward to give it a few more mm clearance. I think were good!
The one thing I'm bummed on it my factory Porsche center caps wont fit in the Euromeisters! Dangint...
Ignore the Barbie Dream House...
Looking great!
Dang... Those look really nice!
Nice Rig!!!!
Vysoc
Looks really nice
Cool, now I know exactly what my silver 914 will look like when it gets the same treatment - superb
Love the look, maybe try black lug nuts?
Very nice I am painting my 15x8 and swapping them for my cookie cutters in the rear. There is no replacement for a Fuch on a 914 or early 911. It is timeless.
Thanks ya'all. Yea I considered black nuts but I dont hate the silver yet, haha. I do need to finesse the center caps in!
Those are fun tires
Good to know that 7's will fit all around - car looks great.
Great looking all the way around!
Car looks great!
Artic Silver or another variation?
I have the same size Euromeisters, with 205x45xR16's Hancock tires. I had to "roll" the lips in with a baseball bat on the tires, and "pull" the rear fenders out a little to get close but enough clearance, then added 5 mm spacers on the front wheels for a better looking fit. Also, I had some original 911 hub caps which after some adjustment to the inner steel "cups" fit these wheels. I use 911 alloy wheel nuts after measuring and grinding the bolts shorter on my 5 lug conversion so as to ensure the bolts were not too long.
IT IS really weird that these companies doing the Fuchs replicas don't design them so they'll accept the factory center cap.
What are they thinking about? Really
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)