What type and size fastener is used for the 4 spots at the bottom of the back pad?
Thanks Brian
4 #8 stainless sheet metal screws
Don't forget to use the 4 aluminum inserts in the back pad holes.
Thanks Tom.
# 8 screws are not big enough. I don't know why but it maybe the PO might have
screwed it up. I wasn't sure what was used so now I have a idea. I will make it work.
Brian
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)