Printable Version of Topic

Posted by: mb911 Mar 12 2017, 10:17 AM

So I bought one of these a year ago because I considered casting them as a option but they are so darn heavy so I will just use it for my test stand and not sell them along with my fabricated tanks.

I thought I would throw this out there for folks that are looking for a stock looking tank and a reasonable cost. What I am offering is a service so not sure if this should be in the classifieds or not but mods please move if it should?

The thought is if you buy a tank from this eBay seller and ship it to me I could complete them for approximately 400-475 .. The number would be based off of volume as it is setup time on the machine..

I prefer my tanks but thought there are others out there that really like these tanks

Posted by: mb911 Mar 12 2017, 10:17 AM

Look at this on eBay http://www.ebay.com/itm/112103681260

Posted by: Mark Henry Mar 12 2017, 10:58 AM

Oh...So you were the one that bought those tanks

Good price you should be able to get rid of them. Check the castings for porosity, the Vellios tanks often leak right from new.
Simple welding for you to fix, but you would want to make sure before you ship.

Posted by: mb911 Mar 12 2017, 11:45 AM

I just bought 1 tank from effron for some R&D. He's is well meaning but very very slow delivery.. I was just thinking of those folks that may want factory look and adding 10 lbs to the car.. . And no way of welding and machining them. I am in no way involved with the seller of these ..