I need to strip the paint off my flares before taking it to the body shop. What should i use to strip off Fiberglass that i can get locally? I tried home depot, but, everything they have will eat my flares
Dont' know what you should use to strip paint from glass, but......Which body shop? I'm in your area and thinking about body work/paint within next six months.
I'm thinking sanding or media blasting with CO2 or baking soda might be your best bets....
pour some of that caustic BBQ sauce on there
I would use the aircraft stripper... and do a hand sized area ta'time.
M
QUOTE (Always Looking @ May 4 2005, 05:03 PM) |
Dont' know what you should use to strip paint from glass, but......Which body shop? I'm in your area and thinking about body work/paint within next six months. |
QUOTE (Aaron Cox @ May 4 2005, 05:10 PM) |
pour some of that caustic BBQ sauce on there |
Plasma cutter?
The aircraft stripper should work OK.
Pressure-washer (2100 PSI) might do the trick... or punch holes in the F/G.
dont use the power washer if its chopper gun glass . if you cut through the gel coat it will fly apart..
I agree with Mueller, chemical strippers will do bad things to fiberglass and bondo (I assume there's bondo along the seams where the flares are mounted).
a local co had a vette body they used as a demo for their plastic bead (hate to use the term blast) media. they did a half and half. i was pretty impressed. who ever you may choose, take a small piece of similar f.g. in and see what the finnished product looks like.
k
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)