Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Yet another barn find

Posted by: adolimpio Mar 20 2017, 08:02 PM

I'll apologize in advance for the long story!

I was in San Diego on business and was talking with some guys about cars at the bar one night. I mentioned that my favorite car was the Porsche 914 and one of the guys said that he had just seen a barn-find on eBay. I checked it out and it looked great, and it was in Portland. So I change my plane tickets and went to Portland to see it.

Some guy had started to restore it for his son in 2001, but in about 2006 his son decided he wanted a 911, so the guy just let it sit until he sold the farm, and the buyer found that in addition to the farm, he now owned a 914.

The guy had replaced all brake rotors, springs, shocks, torsion bars, rebuilt all calipers, replaced bushings in front swing arms and rear trailing arms with the bronze bushings with grease fittings, and replaced the gas lines with stainless. He also rebuilt the transmission and replaced the original 1.7 with a 2.0.

It's a 1973 and there is virtually no rust. I had bought a 73 in 1978, and in those 5 years both jack posts were gone, the battery tray was gone and you could see the road at the bottom of the hell hole. But that was Scranton PA with tons of salt on the road. This is 44 years old and no rust - just amazing!

When I got there it did not run since he had no fuel injection or carbs, and the new owner had no idea what the background of the engine was. Based upon the looks of the heads and other components, it obviously was not rebuilt.

He also had the original 1.7 with FI and exhaust system, 2 transmissions, extra muffler for the 2.0, many many boxes of parts, and a set of shop manuals on CD.

So I bought it, rented a U-Haul with a trailer, loaded up the car and all the spare parts and drove it home to South Carolina, through a treacherous blizzard in Wyoming and Nebraska. What a ride!

When I got it home, I clean it up, replaced the oil, adjusted the valves, check the compression, threw on the fuel injection andf ignition system and it started right up.

So I took it out for a ride and the first time I hit the brakes I heard grinding. He apparently stopped working while he was working on the left rear brakes, because there were no pads installed. Never thought to check something like that. Luckily I caught in time so I did not damage the pistons or the rotors.

With the brakes fixed, it runs absolutely great. However, there is a whine in the transission while cruising which I will discuss in another thread.

There are a few disappointments. Heat exchangers are not stainless, mirrors were replaced with after market with additional holes drilled in the doors, and positioned so poorly that they do not cover the original holes, rear valance and skid plate covering steering rack are missing.

Enough of the story, here's some pictures: http://914.dolimpios.com/



Posted by: Robnxious Mar 20 2017, 08:11 PM

Congrats on your buy! Looks like a very nice ride. The nice thing about these cars is (as I am finding out), if you are willing to do some work on it, you can get it put in pretty nice shape in no time. It's the first day of spring, go out and drive it and welcome.png

Posted by: mark04usa Mar 20 2017, 08:29 PM

smilie_pokal.gif Very clean and nice car indeed! Looks well sorted now.

Posted by: KELTY360 Mar 20 2017, 10:32 PM

welcome.png Marathon blue is a great color! Nice find.

Posted by: Shadowfax Mar 21 2017, 06:52 AM

welcome.png

Posted by: Chris H. Mar 21 2017, 09:34 AM

Great find! Marathon Blue is a really cool color. BTW The pieces you are missing are not hard to find. I saw both a rear valance and a skid plate/MC cover at Garold Shaffer's when I was there that were removed from a parts car. He has tons of stuff.

BTW the stock steel heat exchangers are just fine. Pressure test the pipes for holes though...easy to do.

Posted by: adolimpio Mar 21 2017, 06:51 PM

QUOTE(Chris H. @ Mar 21 2017, 11:34 AM) *

Great find! Marathon Blue is a really cool color. BTW The pieces you are missing are not hard to find. I saw both a rear valance and a skid plate/MC cover at Garold Shaffer's when I was there that were removed from a parts car. He has tons of stuff.

BTW the stock steel heat exchangers are just fine. Pressure test the pipes for holes though...easy to do.


I found a valance and I'll check with Garold about the skid plate. Thanks.

Posted by: Larmo63 Mar 21 2017, 07:11 PM

That looks like a nice solid car!! welcome.png

I'd get the black paint off of the wheels, but that's my taste. They look much better all silver.

You'll get the fever sooner or later, and do a five lug conversion.

Posted by: adolimpio Mar 21 2017, 08:51 PM

QUOTE(Larmo63 @ Mar 21 2017, 09:11 PM) *

That looks like a nice solid car!! welcome.png

I'd get the black paint off of the wheels, but that's my taste. They look much better all silver.

You'll get the fever sooner or later, and do a five lug conversion.


I agree, and those mirrors gotta go too.

Posted by: aggiezig Mar 21 2017, 10:21 PM

Wow, what a great story and an even better find. Stumbling across a 914 barn find and driving it back across the country is the stuff some of us daydream about. Congrats!

Posted by: maf914 Mar 22 2017, 06:27 AM

Way to go! Great find! first.gif

How long did your return tow trip from Portland to South Carolina take?

Posted by: krazykonrad Mar 22 2017, 06:51 AM

welcome.png

That's a great find!

Konrad

Posted by: PlantMan Mar 22 2017, 07:48 AM

I agree, nice care.
Congrats!

welcome.png

Posted by: Mikey914 Mar 22 2017, 11:02 AM

Check the transmission fluid may fix the problem

Posted by: Justinp71 Mar 22 2017, 11:20 AM


Nice car! Great color too!

Posted by: adolimpio Mar 22 2017, 07:54 PM

QUOTE(Justinp71 @ Mar 22 2017, 01:20 PM) *

Nice car! Great color too!

I've owned 3, and just by chance all 3 where the same color.

Posted by: TonyA Mar 22 2017, 08:50 PM

QUOTE(adolimpio @ Mar 20 2017, 10:02 PM) *

I'll apologize in advance for the long story!

I was in San Diego on business and was talking with some guys about cars at the bar one night. I mentioned that my favorite car was the Porsche 914 and one of the guys said that he had just seen a barn-find on eBay. I checked it out and it looked great, and it was in Portland. So I change my plane tickets and went to Portland to see it.

Some guy had started to restore it for his son in 2001, but in about 2006 his son decided he wanted a 911, so the guy just let it sit until he sold the farm, and the buyer found that in addition to the farm, he now owned a 914.

The guy had replaced all brake rotors, springs, shocks, torsion bars, rebuilt all calipers, replaced bushings in front swing arms and rear trailing arms with the bronze bushings with grease fittings, and replaced the gas lines with stainless. He also rebuilt the transmission and replaced the original 1.7 with a 2.0.

It's a 1973 and there is virtually no rust. I had bought a 73 in 1978, and in those 5 years both jack posts were gone, the battery tray was gone and you could see the road at the bottom of the hell hole. But that was Scranton PA with tons of salt on the road. This is 44 years old and no rust - just amazing!

When I got there it did not run since he had no fuel injection or carbs, and the new owner had no idea what the background of the engine was. Based upon the looks of the heads and other components, it obviously was not rebuilt.

He also had the original 1.7 with FI and exhaust system, 2 transmissions, extra muffler for the 2.0, many many boxes of parts, and a set of shop manuals on CD.

So I bought it, rented a U-Haul with a trailer, loaded up the car and all the spare parts and drove it home to South Carolina, through a treacherous blizzard in Wyoming and Nebraska. What a ride!

When I got it home, I clean it up, replaced the oil, adjusted the valves, check the compression, threw on the fuel injection andf ignition system and it started right up.

So I took it out for a ride and the first time I hit the brakes I heard grinding. He apparently stopped working while he was working on the left rear brakes, because there were no pads installed. Never thought to check something like that. Luckily I caught in time so I did not damage the pistons or the rotors.

With the brakes fixed, it runs absolutely great. However, there is a whine in the transission while cruising which I will discuss in another thread.

There are a few disappointments. Heat exchangers are not stainless, mirrors were replaced with after market with additional holes drilled in the doors, and positioned so poorly that they do not cover the original holes, rear valance and skid plate covering steering rack are missing.

Enough of the story, here's some pictures: http://914.dolimpios.com/

Great find and another good excuse for going to the bar!

Posted by: adolimpio Mar 23 2017, 07:40 PM


Great find and another good excuse for going to the bar!
[/quote]
Do you rally need an excuse?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)