I've got a low spoiler and no fog lights so this is appealing. For those that have already done this, how much reinforcement to prevent ripping apart the chassis?
PS. Thanks Howard
Looks like a very weak area.
I would start with a sway bar reinforcement plate lengthened to the bumper mounting holes and a plate welded to the front at the tow bar mount. Tie everything together. While your at it, tie the two tow bar mounts together with a 2"x1/8" thick steel bar across the front under the bumper. Effectively making a steel horseshoe across the front of the car.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)