Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ GB new front turn signal lenses - New hard tooling

Posted by: Mikey914 Apr 3 2017, 04:18 PM

updated:
Since I just listed the boots that were prewired Figured I should get these up too.
We are looking to blow these out! Set of turn signal lenses available in amber ($9.99), or clear ($13.99).

Buy the gaskets for them and use code GBLENS2017 for free USPS first class shipping.
http://shop.914rubber.com/Turn-Signal-Lens-Set-Group-Buy-FTSLGB.htm


Attached thumbnail(s)
Attached Image Attached Image Attached Image

Posted by: mb911 Apr 3 2017, 04:54 PM

Will you be doing Euro turn signal lenses?

Posted by: jd74914 Apr 3 2017, 05:07 PM

I'm up for a set. smile.gif

Posted by: drem914 Apr 3 2017, 05:09 PM

QUOTE(mb911 @ Apr 3 2017, 03:54 PM) *

Will you be doing Euro turn signal lenses?


Or how about the Italian clear version? shades.gif

Posted by: burton73 Apr 3 2017, 05:55 PM

" GB new fog light lenses - New hard tooling, $9.99 a set!!!!!!!! April Special"

Sorry if I did not get this right. Is the sale for turn signal lenses shown or for fog lenses?

Thanks for your support for 914s. I installed the door top small rubber parts and it did the trick. Great job fast delivery

Bob B

Posted by: jet1 Apr 3 2017, 05:56 PM

in for a set

Posted by: Mikey914 Apr 3 2017, 06:58 PM

QUOTE(mb911 @ Apr 3 2017, 03:54 PM) *

Will you be doing Euro turn signal lenses?

Unfortunately, the Euro version is a little more difficult, and will require some additional tooling, not saying no, just not right now.

Posted by: Mikey914 Apr 3 2017, 06:59 PM

QUOTE(drem914 @ Apr 3 2017, 04:09 PM) *

QUOTE(mb911 @ Apr 3 2017, 03:54 PM) *

Will you be doing Euro turn signal lenses?


Or how about the Italian clear version? shades.gif

Getting the material in to do the clear. The will actually be a couple dollars more ($4 for the GB), but still a screaming deal.

Posted by: Mikey914 Apr 3 2017, 07:02 PM

QUOTE(burton73 @ Apr 3 2017, 04:55 PM) *

" GB new fog light lenses - New hard tooling, $9.99 a set!!!!!!!! April Special"

Sorry if I did not get this right. Is the sale for turn signal lenses shown or for fog lenses?

Thanks for your support for 914s. I installed the door top small rubber parts and it did the trick. Great job fast delivery

Bob B

My mistake. I have corrected - Front turn signal lenses. I was working on more fog light grills and the brain didn't shift gears. MDB2.gif

Posted by: mepstein Apr 3 2017, 07:16 PM

QUOTE(Mikey914 @ Apr 3 2017, 08:58 PM) *

QUOTE(mb911 @ Apr 3 2017, 03:54 PM) *

Will you be doing Euro turn signal lenses?

Unfortunately, the Euro version is a little more difficult, and will require some additional tooling, not saying no, just not right now.

They are $70 on amazon. Not terrible but I want 4 sets so I'll wait on you.

Posted by: SKL1 Apr 3 2017, 08:07 PM

I've got the Italian clear lenses on my silver '71 and they look great. I'd love an extra set.
Hope you make the euro lenses too as one of mine on the '73 is cracked... if you do any GB's, I'm in!

I've got several sets of OEM US lenses collecting dust!

Posted by: RJMII Apr 4 2017, 12:43 AM

2 Italian sets for me, please.

Posted by: Tbrown4x4 Apr 4 2017, 02:50 AM

2 sets for me. ( 4 lenses, 4 gaskets)

Posted by: falcor75 Apr 4 2017, 05:00 AM

I will sign up for one set of Italians. Might spring for that custom carpet piece we've discussed to fit a Rennshift at the same time when you have these done.

Posted by: jacksun Apr 4 2017, 05:01 AM

Hi, I would like one set of lens and seals
tks

Posted by: dlee6204 Apr 4 2017, 05:14 AM

Interested in 2 sets

Posted by: sb914 Apr 4 2017, 05:56 AM

I'll take a set, and a clear set with seals

Posted by: jmitro Apr 4 2017, 06:23 AM

I'm in for a set of orange and seals.
I'll be making a huge order for your entire late rubber package and carpet kit pretty soon beerchug.gif

Posted by: rfinegan Apr 4 2017, 06:32 AM

I have not seen the smoked lenses available for some time, any plans on making these?
I would be in for a set and gaskets

-Robert

Posted by: Chris H. Apr 4 2017, 07:20 AM

Hit me with some orange ones (1 set). I already have the seals just didn't want to use them on the lenses I have.

Posted by: Beach914 Apr 4 2017, 08:09 AM

I would like two sets please.

Posted by: 76-914 Apr 4 2017, 08:43 AM

I don't need any but I can't help but remember looking and paying more for used lenses a few years back. Thanks to Mark and a few other peeps here I don't need to search ads and trash cans for parts any longer. Thx for all you do Mark! beerchug.gif

Posted by: markhoward Apr 4 2017, 08:52 AM

I'm in for a set. Thanks Mark!!

Posted by: Mikey914 Apr 4 2017, 09:00 AM

QUOTE(rfinegan @ Apr 4 2017, 05:32 AM) *

I have not seen the smoked lenses available for some time, any plans on making these?
I would be in for a set and gaskets

-Robert

WE are not making the Smoked currently, however the clear can be smoked if you want to put film on them.
Mark

Posted by: toolguy Apr 4 2017, 09:00 AM

2 sets with gaskets please

What is the time frame for the Euro version ??

And a BIG THANK YOU for all your efforts to our community first.gif .

Posted by: SteveL Apr 4 2017, 09:05 AM

I want a set please - how much for lenses and seals?
Thanks!

Posted by: Mikey914 Apr 4 2017, 09:11 AM

The seals are $16.50 for the set, but buy both together you get free shipping on the set.

Posted by: pgollender Apr 4 2017, 09:13 AM

Mike, when you tool up for the Euro-version, I'm in for two sets.

Posted by: Mikey914 Apr 4 2017, 09:26 AM

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk

Posted by: mobymutt Apr 4 2017, 09:31 AM

QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk


Would it be possible to make those as two pieces, and bond them together, rather than using double injection?

Posted by: pgollender Apr 4 2017, 09:33 AM

QUOTE(Mikey914 @ Apr 4 2017, 08:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk


Copy that. Some little things are worth the price difference.

Posted by: Mikey914 Apr 4 2017, 09:43 AM

QUOTE(mobymutt @ Apr 4 2017, 08:31 AM) *

QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk


Would it be possible to make those as two pieces, and bond them together, rather than using double injection?

Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.

We will have a vote on nicest ones winner gets them for free!!!

Anyone interested in a contest?

Posted by: ConeDodger Apr 4 2017, 09:56 AM

I'll take one of the the Targa Bar Pads poke.gif

Seriously, what are you thinking! You're giving away the store! blink.gif

Posted by: mobymutt Apr 4 2017, 11:35 AM

QUOTE(Mikey914 @ Apr 4 2017, 11:43 AM) *

QUOTE(mobymutt @ Apr 4 2017, 08:31 AM) *

QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk


Would it be possible to make those as two pieces, and bond them together, rather than using double injection?

Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.

We will have a vote on nicest ones winner gets them for free!!!

Anyone interested in a contest?


Can't figure out if you're making fun of me or not! Still, for that price, I might just go ahead. Although now I'd need to get three sets, so I'd still have a good set after I botch it all up.

Posted by: yeahmag Apr 4 2017, 07:43 PM

I'm in for a set.

Posted by: mepstein Apr 4 2017, 07:54 PM

QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk

I'm good up to $75. Hopefully it can be less.

Posted by: wndsrfr Apr 4 2017, 08:01 PM

I'm in for a set of the clear lenses....

John

Posted by: green914 Apr 4 2017, 08:12 PM

I will take a set. w00t.gif

Posted by: Larry Hubby Apr 4 2017, 08:42 PM

I'll take a set of the orange with seals.

Posted by: aggiezig Apr 4 2017, 09:00 PM

Would be in for one clear and one amber set + 2 x seals

Posted by: Nie Zu Alt Apr 4 2017, 09:09 PM

2 clear lens sets for me with gaskets. ( 4 lenses, 4 gaskets)

Thanks!

Doug H.

Posted by: Mark Henry Apr 4 2017, 09:25 PM

When does this close?
What else is on special price?

Posted by: Mikey914 Apr 4 2017, 10:35 PM

QUOTE(mobymutt @ Apr 4 2017, 10:35 AM) *

QUOTE(Mikey914 @ Apr 4 2017, 11:43 AM) *

QUOTE(mobymutt @ Apr 4 2017, 08:31 AM) *

QUOTE(Mikey914 @ Apr 4 2017, 11:26 AM) *

Just to let you know the GB on the Euros will be significantly more than these. Single injection tooling is much less. There is a reason that no one else has made them yet.

MArk


Would it be possible to make those as two pieces, and bond them together, rather than using double injection?

Possible, yes cost effective for production probably not. But I can sell you a set of both very inexpensively.

We will have a vote on nicest ones winner gets them for free!!!

Anyone interested in a contest?


Can't figure out if you're making fun of me or not! Still, for that price, I might just go ahead. Although now I'd need to get three sets, so I'd still have a good set after I botch it all up.

Not making fun of you, I'm dead serious. I just tried and it's not too hard to do this. I cut both clear and amber at the inner web, sanded the edge smooth to the rib with a belt sander, and glued together with 5min epoxy on a flat surface. Then went back and added more epoxy on the inside after the 1st edge gluing. Turned out pretty nice.

Do understand the clear are $13.99 a set as they do cost me more to make. Also you can imagine I'm doing this as a promotion so I am loosing money to get these out there. I will hold it open for 2 weeks after I get this up and start contacting all that step forward. It will be with a code you will need to enter on the site, so you will need to bump the thread to get it.

My job was a bit rushed, but the results are acceptable to me. I will be putting on my car.


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Mikey914 Apr 5 2017, 01:41 AM

I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.


Attached thumbnail(s)
Attached Image Attached Image

Posted by: mepstein Apr 5 2017, 04:11 AM

QUOTE(Mikey914 @ Apr 5 2017, 03:41 AM) *

I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.

That would be great.

Posted by: mb911 Apr 5 2017, 05:57 AM

QUOTE(mepstein @ Apr 5 2017, 02:11 AM) *

QUOTE(Mikey914 @ Apr 5 2017, 03:41 AM) *

I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.

That would be great.



I would be in at that price for sure.

Posted by: Peashooter Apr 5 2017, 06:39 AM

I'd like a clear set with gaskets! Thanks!

Posted by: RobW Apr 5 2017, 06:39 AM

I'm in for a set of the orange. Will get back to you on the other set once I get home. thanks!

Posted by: Shadowfax Apr 5 2017, 06:54 AM

Please put me down for two sets - one orange set and one clear. Thanks, Mark!

Posted by: mobymutt Apr 5 2017, 07:20 AM

Mark, what's the timing on these? I'd like to add them to my current order (orange or clear or both), but only if they can be shipped in April.


Posted by: Mikey914 Apr 5 2017, 09:31 AM

I was just finishing up the clear yesterday. Only got enough material to do 200 pcs (100 sets) so it didn't go as far as I had hopped. I do have the orange done and the Euro version may be a week or so (unless I play with them today dry.gif )

I do need to get listed and get them listed and add the coupon to that I can get these moving, but yes you will be able to add to your cart as faast as I can get them listed.

Posted by: 74K914 Apr 5 2017, 10:37 AM

set with gaskets.
Thanks

Posted by: bando6 Apr 5 2017, 11:00 AM

I would like a pair of lenses (orange) with gaskets please!

Posted by: Mark Henry Apr 5 2017, 11:49 AM

Mobymutt is going to grab the lenses I want, so he will be ordering them for me.

3 sets of yellow and one set of clear. Plus two sets of seals


Posted by: Gary Apr 5 2017, 12:22 PM

I'm up for a set of clears and gaskets.

Posted by: 7TPorsh Apr 5 2017, 12:35 PM

Is the orange on the euro lense supposed to be a little darker than the US orange? I swear I remember seeing the hellas side by side and the Euros were a bit darker...

Posted by: Mikey914 Apr 5 2017, 02:14 PM

The current "Hellas" don't look that way, but I have seen what you are talking about.


Attached image(s)
Attached Image

Posted by: Kansas 914 Apr 5 2017, 06:57 PM

I am in for a set of orange OEM USA package.

Posted by: Kansas 914 Apr 5 2017, 06:59 PM

QUOTE(7TPorsh @ Apr 5 2017, 12:35 PM) *

Is the orange on the euro lense supposed to be a little darker than the US orange? I swear I remember seeing the hellas side by side and the Euros were a bit darker...

My Hella Euro lenses are VERY dark orange compared to the USA orange - but they are vintage early 70s.

More like these:
Attached Image

Posted by: drem914 Apr 5 2017, 07:25 PM

I am in for a set of clears. Add me to the list, please.

Posted by: arvcube Apr 5 2017, 08:04 PM

I'd like set of orange with gaskets please

Posted by: turnaround89 Apr 5 2017, 09:33 PM

I'm in for an orange set with gaskets.

Posted by: funk Apr 5 2017, 10:10 PM

a set of Italian please and thanks for the killer deals dude

Posted by: 914fool Apr 6 2017, 04:15 AM

Mark, put me in for 1 set of orange wirh gaskets, Thanks!!

Posted by: mobymutt Apr 6 2017, 07:10 AM

I'll take one set of orange with gaskets.

Posted by: SA-914 Apr 6 2017, 07:41 AM

I'll take one set of orange with gaskets.

Posted by: mbseto Apr 6 2017, 10:43 AM

Please add me for a set of orange with seals. Thank you.

Posted by: Costa05 Apr 6 2017, 11:48 AM

I will take a set of orange with gaskets.

Posted by: gus'914 Apr 7 2017, 02:01 AM

I'll take a set of orange with gaskets, please.

Posted by: Tbrown4x4 Apr 7 2017, 03:20 AM

Ordered. Thanks!

Posted by: RJMII Apr 7 2017, 01:03 PM

QUOTE(Mikey914 @ Apr 4 2017, 08:11 AM) *

The seals are $16.50 for the set, but buy both together you get free shipping on the set.



I'll probably need one set of seals with the two sets of turn signal lenses.

When/how do we pay?

Posted by: GeorgeRud Apr 7 2017, 03:36 PM

I'd like an orange set with gaskets. Info on how to order and pay?

Posted by: mkinne Apr 7 2017, 04:45 PM

Please put me down for one set + seals.

-M

Posted by: Mikey914 Apr 7 2017, 05:01 PM

Pm's sent, link and code added to first post as well

Posted by: mgp4591 Apr 7 2017, 09:41 PM

I'm in for two amber sets with all the hardware please!

Posted by: sb914 Apr 8 2017, 05:46 AM

Just TRIED to order not sure it worked. Never got email confirmation!

Posted by: Mikey914 Apr 9 2017, 12:50 AM

Thanks All,
Blake has been setting this up and pm'ing everyone as the day job is keeping me pretty tied up.

I saw the comment above regarding the confirmation. The Godaddy shopping cart does automatically send a confirmation on all completed orders, so you should in theory get one if processed. However, another feature that will be corrected is the confirmation shows a different domain than the email uses for return contact, so some ISPs will filter them out.
Please drop Scott in shipping a call if you would like a confirmation or PM me your full name so we can look it up (as I can't dininitively tell who you are from you user name).

Thanks,
Mark

Posted by: SKL1 Apr 9 2017, 01:27 AM

not sure if you're making the clear or Italian yet, but I'd be in for a set with gaskets. and a set of euro lenses when you make them, if you do.
TIA.

Posted by: old dog Apr 9 2017, 11:03 AM

I would like a set of clear with gaskets,

Thanks Mark !

Posted by: Tbrown4x4 Apr 9 2017, 12:09 PM

My confirmation went to junk mail, but sent within 2 minutes.

Posted by: Mikey914 Apr 10 2017, 08:19 AM

QUOTE(mgp4591 @ Apr 7 2017, 08:41 PM) *

I'm in for two amber sets with all the hardware please!

Sorry haven't sourced the screws yet but working on it.

PMs sent to all so far. Let me know if anyone was missed.
Thanks,
Mark

Posted by: Nutter965 Apr 10 2017, 09:44 AM

Mark, I'm in for a set of clears, what's the chances of shipping them to Vegas as I'm here on a break , rather than to the UK ! Only here till the 16th thought!!

Posted by: Mikey914 Apr 10 2017, 10:18 AM

QUOTE(Nutter965 @ Apr 10 2017, 08:44 AM) *

Mark, I'm in for a set of clears, what's the chances of shipping them to Vegas as I'm here on a break , rather than to the UK ! Only here till the 16th thought!!

Not a problem. We can ship today to your address provided. Priority mail would be 3 days max. We can ship today, so you should have friday. You will need to order today to avoid more expensive shipping.
-Mark

Posted by: Chris914n6 Apr 10 2017, 03:37 PM

Oh, the lenses are supposed to lay flat? Guess I need some new pretty ones too with fresh gaskets.

Send the code I'll add it to the ever growing budget busting needs list.

In case you're wondering, I blew last months allowance on a pair of 911sc struts from a local guy. Price too good to pass up... deja vu lol-2.gif

Posted by: sb914 Apr 10 2017, 04:55 PM

Ordered and paid thanks mark!

Posted by: restore2seater Apr 10 2017, 05:43 PM

I'm in for 1 set of amber lenses with gaskets.

Posted by: SKL1 Apr 10 2017, 11:32 PM

Tried to order a set of 2 clears with gaskets but when I add the GB coupon, it still is charging for shipping and regular price in the total even though it says 9.99.

?

Posted by: Mikey914 Apr 11 2017, 12:07 AM

Let me email you the link directly. There was some funkiness with the way this was set up It was only referenced through the GB section I added the links to the seals on the listing.
Mark

Posted by: mgp4591 Apr 11 2017, 12:44 AM

Just ordered mine too - I looked at the bill and it charged me shipping...

Posted by: Mikey914 Apr 11 2017, 12:54 AM

QUOTE(mgp4591 @ Apr 10 2017, 11:44 PM) *

Just ordered mine too - I looked at the bill and it charged me shipping...

Just checked the order doesn't look like the coupon code applied. We can correct it no problem.
Mark

Posted by: Shadowfax Apr 13 2017, 01:24 PM

Hey, Mark. The lenses arrived today. They look great! Turns out the original lenses were slightly warped after all. The new ones fit perfectly on the seal.
I installed the clear set first and they really look good on a white car. They clashed with the orange sidemarkers so swapped them out with the amber set until I decide whether to get clear sidemarkers to match or just delete them altogether. First World problems, right?

Thanks again! smilie_pokal.gif beer.gif white914.jpg

Posted by: SKL1 Apr 13 2017, 08:36 PM

Just got my Italian lens and seals today- look great!

Thx Mark and Scott... we get great resources at this site!

Posted by: Mikey914 Apr 14 2017, 08:22 AM

Thanks guys
Just wanted to get these out there so people could see them. I'm quote happy with how these turned out.
Mark

Posted by: mkinne Apr 14 2017, 09:36 PM

Just placed order.
Selected USPS 1st Class shipping, entered coupon code, and shipping charge was removed.

Thanks Mikey thumb3d.gif

-M

Posted by: Nie Zu Alt Apr 20 2017, 09:23 AM

My clear lenses and gaskets arrived yesterday. They fit perfectly! Thanks for offering these!

Doug H.

Posted by: Morph914 Apr 20 2017, 11:38 AM

I'll take a set of the amber lenses with gaskets please.

Thanks,
John

Posted by: Mikey914 Apr 20 2017, 05:24 PM

Right here -
Buy the gaskets for them and use code GBLENS2017 for free USPS first class shipping.
http://shop.914rubber.com/Turn-Signal-Lens...-Buy-FTSLGB.htm

Posted by: TargaToy Apr 20 2017, 07:16 PM

That was easy!

Just ordered an amber set.

Thanks so much!!

Posted by: mgp4591 Apr 20 2017, 08:27 PM

Got mine the other day and they look great - Thanks Mark!

Posted by: rfinegan Apr 21 2017, 11:07 AM

I'M in for a set of clear and gaskets. is this a code? Will i be able to enter 2 codes for the CV gaskets on the same order?

-Robert

Posted by: Mikey914 May 1 2017, 10:23 AM

This was set to expire 4/20/17, however some were under the impression this was a month long special from my title. So I have extended one more day !
Today only

http://shop.914rubber.com/Turn-Signal-Lens-Set-Group-Buy-FTSLGB.htm?categoryId=-1

Use the same coupon code GBLENS2017 to receive free first class mail domestic shipping.

Thanks,
Mark

Posted by: rfinegan May 1 2017, 11:17 AM

AWESOME, just got an order in

Best


-Robert

Posted by: green914 May 1 2017, 03:20 PM

QUOTE(Mikey914 @ Apr 5 2017, 12:41 AM) *

I'm thinking we should be able to do these at $46 a set. I really like the way they turned out.


I would be in for a set w00t.gif
The amber lenses arrived, and look great.

Thanks!

Posted by: Mikey914 May 1 2017, 03:37 PM

I'll post up a GB thread for the Euro. We will do these on a preorder basis we have some inventory but not enough for a full Gb if there's a bunch of people that want them. Look for the new thread.
Mark

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)