Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 914-6 part for 914rubber
Posted by: mepstein Apr 7 2017, 01:57 PM
I'm pretty sure this part is nla. There are some oil tank seals that are pricey. Will 914rubber come to the rescue please.Thanks
Attached thumbnail(s)
Posted by: mb911 Apr 7 2017, 02:06 PM
Mark what part is that?
Posted by: mepstein Apr 7 2017, 02:47 PM
I'm pretty sure it's the rubber grommet that fits on the 914-6 only hook that hangs down from the left side long to hold the oil line.
Attached thumbnail(s)
Posted by: Mark Henry Apr 7 2017, 03:02 PM
Stoddards has it for $6.29, but it looks different from yours.
http://www.stoddard.com/99970206450.html
Posted by: SixerJ Apr 7 2017, 03:20 PM
I'm pretty sure this part is nla. There are some oil tank seals that are pricey. Will 914rubber come to the rescue please.Thanks
I'm sure I have a very manky looking one like this on an old oil pipe. Nothing like Stoddards, looks too thick to me
I'd be in
Posted by: mepstein Apr 7 2017, 04:08 PM
Stoddard' might work but it's not oem.
Attached thumbnail(s)
Posted by: Mark Henry Apr 7 2017, 04:28 PM
Is that seal for the hanger or a through the body grommet? 
Posted by: gcrotvik Apr 7 2017, 04:28 PM
I'm in for a few. Been looking for that part.
Posted by: gcrotvik Apr 7 2017, 04:35 PM
Is that seal for the hanger or a through the body grommet?
That's the through body seal, not for the hook although I don't see the seal for the hook in the PET. it might be the same.
Posted by: Mark Henry Apr 7 2017, 04:36 PM
Is that seal for the hanger or a through the body grommet?
Posted by: mepstein Apr 7 2017, 04:51 PM
Is that seal for the hanger or a through the body grommet?
Hmmm, I think your right.
Posted by: McMark Apr 7 2017, 06:32 PM
Btw, I have those hook pieces laser cut if anyone wants one.
Posted by: rgalla9146 Apr 7 2017, 07:57 PM
The one pictured next to the white box looks right except for the size of the hole...the hole should extend to the inside shoulder.
Dimensions would help.
Posted by: gcrotvik Apr 7 2017, 09:40 PM
Btw, I have those hook pieces laser cut if anyone wants one.
PM sent.
Posted by: Mark Henry Apr 8 2017, 01:04 AM
Is that seal for the hanger or a through the body grommet?
Whoa... déjà vu...must have been a glitch in the matrix.
Posted by: Perry Kiehl Apr 8 2017, 07:25 AM
i'm pretty sure that's a grommet for one of the oil tank tubes, probably the small one at the top for the breather hose
Posted by: raynekat Apr 8 2017, 12:02 PM
Btw, I have those hook pieces laser cut if anyone wants one.
I want please....
You have a PM.
Posted by: Mikey914 Apr 9 2017, 12:41 AM
If I can borrow for a month I'll make these. Looks like a worthwhile part.
Posted by: rgalla9146 Apr 9 2017, 09:42 AM
i'm pretty sure that's a grommet for one of the oil tank tubes, probably the small one at the top for the breather hose
The holes through the inner fender don't have grommets, they have foam collars in between the tank and the inner fender.
Posted by: mepstein Apr 9 2017, 12:02 PM
i'm pretty sure that's a grommet for one of the oil tank tubes, probably the small one at the top for the breather hose
The holes through the inner fender don't have grommets, they have foam collars in between the tank and the inner fender.
Mark needs to make them as well. I think the one for the oil console is crazy expensive.
Posted by: porbmw Apr 9 2017, 05:18 PM
I'd be in for two... 
Posted by: Mikey914 Apr 9 2017, 06:26 PM
Guys this is a pretty easy one to make. Can anyone get me the fits to dimensions ?
ID of hose and hole? Metal thickness.
Mark
Posted by: 6freak Apr 10 2017, 07:42 AM
Is that seal for the hanger or a through the body grommet?
its goes on back fire wall around starter wires
Posted by: Mikey914 Apr 10 2017, 08:02 AM
SO, is it the same as the hole fro the starter wires? Or are there 2 different parts?
Becomes really easy and inexpensive when everyone needs these. Yes, I'd do this for the 6 guys, but if we all need it.....well you get my point.
Posted by: aturboman Apr 10 2017, 09:25 AM
999 702 132 50 is a starter cable grommet for 3.2 Carrera 84-86
999 702 088 50 is the grommet for the oil line on 914-6 where it goes through the engine compartment sheet metal
999 702 089 50 is the grommet for the oil line support "hook"
Porsche superceeds the 999 702 088 50 to 999 702 132 50 but its not really correct the original has a much larger center hole to accommodate the oil line OD.
I suspect it can be made to work but you should copy the correct original style part if you're going through the trouble.
999 702 089 50 is NLA last time I checked, then again check your dealer they are re-issuing parts all the time.
Posted by: Mikey914 Apr 10 2017, 09:44 AM
Thanks I get the idea now. As with superseded parts one can be made to fit the other. As the later one exists I will make the "correct" early one as soon as I can get a sample. So on the oil line and the hole it passes through if someone can PM me the dimensions I will add to my notes to make sure this fits properly.
Thanks,
mark
Posted by: Mark Henry Apr 10 2017, 10:05 AM
My tank holes I used a template but have a DWD tank and the holes don't line up exactly. If you were to reproduce them it would be nice if the OD lip was oversize so that there's a bit of wiggle room to offset the seal.
Posted by: Mikey914 Apr 10 2017, 10:16 AM
I'll look at that. may be worthwhile unless it creates clearance issues with cross referenced parts.
Posted by: Mark Henry Apr 10 2017, 10:26 AM
My tank holes I used a template but have a DWD tank and the holes don't line up exactly. If you were to reproduce them it would be nice if the OD lip was oversize so that there's a bit of wiggle room to offset the seal.
I'll look at that. may be worthwhile unless it creates clearance issues with cross referenced parts.
Or if the ID was tight the customer could trim the offset in the center hole of the seal.
Posted by: Mikey914 Apr 10 2017, 12:39 PM
The original part looks like it is a stretch fit. So it should do just that. If I can get an actual measurement off the hose line I can confirm, but I's suspect it's set up that way already.
Posted by: 6freak Apr 10 2017, 02:03 PM
i'm pretty sure that's a grommet for one of the oil tank tubes, probably the small one at the top for the breather hose
The holes through the inner fender don't have grommets, they have foam collars in between the tank and the inner fender.
correct! none of them.. The two parts in question will not interchange the oil line rubber is much bigger ID and smaller OD yet thicker then the firewall piece..I need that oil hose piece mike, the home made version is just not as clean
Posted by: 6freak Apr 10 2017, 02:27 PM
The original part looks like it is a stretch fit. So it should do just that. If I can get an actual measurement off the hose line I can confirm, but I's suspect it's set up that way already.
the wire grommet on the firewall pops in easy and wires push right through,,the other should be snug on the hook, but not tight on the hose ,the hook just cradles the hose and the hose moves inside the grommit
Posted by: mepstein Apr 11 2017, 02:14 PM
Here's an item to add to the list. Oil filter console seal. $42 list price. I pay less than list but it's still pricey. I could use a couple more. The O ring was $4 and the seal for the oil cap is $8.
Attached image(s)
Posted by: Mikey914 Apr 12 2017, 12:19 AM
Ya know where to send them right?
Yes these are a bit steep for what they are.
Posted by: 6freak Apr 12 2017, 06:40 AM
Here's an item to add to the list. Oil filter console seal. $42 list price. I pay less than list but it's still pricey. I could use a couple more. The O ring was $4 and the seal for the oil cap is $8.
that console seal is a MOFO to install IIRC
Posted by: mepstein Apr 12 2017, 10:04 AM
Ya know where to send them right?
Yes these are a bit steep for what they are.
I'll have to buy another set. These are going in my car today.
Posted by: raynekat May 8 2018, 10:43 PM
Any word on reproducing these NLA grommets for the 914-6 oil lines?
Posted by: porschetub May 9 2018, 12:08 AM
Well couldn't even find them @ the time ,with my tank for a test fit there is a need for seals no question,the tank isn't supposed to be close to the body anyway.
For lack of a solution I made tank seals from closed cell foam worked fine and checked on at not so happy ''reasons for removal" (4 times)....hopefully not out of the car again ??????
As fairly simple parts they need to be made again.....Mark ??
Posted by: mepstein May 9 2018, 05:07 AM
I got the foam seals from my Porsche dealer but they were pricey.
Posted by: burton73 Feb 11 2023, 01:01 PM
I'm pretty sure it's the rubber grommet that fits on the 914-6 only hook that hangs down from the left side long to hold the oil line.
The set up on my factory 6 with backflow valve
Bob B
Posted by: dr914@autoatlanta.com Feb 11 2023, 01:50 PM
The Wurth grommet assortment has a part almost exactly like this one
I'm pretty sure this part is nla. There are some oil tank seals that are pricey. Will 914rubber come to the rescue please.Thanks
Posted by: rgalla9146 Feb 11 2023, 02:00 PM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
Attached thumbnail(s)
Posted by: DennisV Jul 7 2023, 07:58 AM
Has anyone successfully procured one of these 999-702-132-50 or 999-702-089-50 in 2023?
Alternatively, can someone provide the ID, OD, and width?
Thank you.
P.S. I have already searched and / or contacted every vendor I can think of.
Posted by: gandalf_025 Jul 7 2023, 08:39 AM
This is the facrory grommit that goes on the hook
for the 914-6 oil line.
Making this has been discussed before..
Posted by: DennisV Jul 7 2023, 08:55 AM
This is the facrory grommit that goes on the hook
for the 914-6 oil line.
Making this has been discussed before..
Thank you for the photo. Can you share the ID, OD, and width? If that was previously posted, I did not see it.
Posted by: gandalf_025 Jul 7 2023, 09:33 AM
I really suck with a ruler..
Not great taking pictures either.
But here goes..
Top inches
Bottom metric..??
Posted by: DennisV Jul 7 2023, 12:10 PM
I really suck with a ruler..
Not great taking pictures either.
But here goes..
Top inches
Bottom metric..??
Thank you for taking time to share those.
I poked around Wurth, but didn't find anything close.
I did find a couple on McMaster that might be serviceable:
- https://www.mcmaster.com/5273T12/
- https://www.mcmaster.com/9307K84/
I'd be interested to know if anyone has found anything closer.
Posted by: 930cabman Jul 7 2023, 12:45 PM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
I for one would like to see this as a "Oil tank install kit" available from one of our trusted vendors. As more and more of us enter the /6 conversion world, it sure would make things easier. Include an oil line kit also
Posted by: mepstein Jul 7 2023, 02:56 PM
Ben/MB911 had quite a few of the parts for sale at great prices.
Posted by: mb911 Jul 8 2023, 07:26 AM
Ben/MB911 had quite a few of the parts for sale at great prices.
Thanks I try
Posted by: T.Rick6 Jul 10 2023, 07:25 AM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
Does anyone have part number for the NORMA 54mm oil filler neck clamp; I've looked at the NORMA website but unable to find the correct width.
Thanks in advance,
Todd
Posted by: mepstein Jul 10 2023, 09:08 AM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
Does anyone have part number for the NORMA 54mm oil filler neck clamp; I've looked at the NORMA website but unable to find the correct width.
Thanks in advance,
Todd
I would love to know. I need 2
Posted by: T.Rick6 Jul 11 2023, 06:52 AM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
@http://www.914world.com/bbs2/index.php?showuser=5176
Morning, can you please share the part number for the oil filler neck NORMA clamp ?, I've looked and found a few 54mm clamps, but I'm unable to determine the correct width.
TIA,
Todd
Posted by: gandalf_025 Jul 11 2023, 07:17 AM
Not sure this will help at all..??
Posted by: rgalla9146 Jul 11 2023, 01:43 PM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
<b>@http://www.914world.com/bbs2/index.php?showuser=5176 </b>
Morning, can you please share the part number for the oil filler neck NORMA clamp ?, I've looked and found a few 54mm clamps, but I'm unable to determine the correct width.
TIA,
Todd
Yes I'll provide the Porsche part number when I get home.
Gandalfs pics show the correct Norma 54 mm clamp
Not sure the part number will be any use AFAIK the part is NLA
Also shown is the correct ribbed hose which as shown always seems to crimp
Posted by: mepstein Jul 11 2023, 01:47 PM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
<b>@http://www.914world.com/bbs2/index.php?showuser=5176 </b>
Morning, can you please share the part number for the oil filler neck NORMA clamp ?, I've looked and found a few 54mm clamps, but I'm unable to determine the correct width.
TIA,
Todd
Yes I'll provide the Porsche part number when I get home.
The pics show the correct Norma 54 mm clamp
Not sure the part number will be any use AFAIK the part is NLA
Also shown is the correct ribbed hose
Rory - You probably have a box of them stashed away, right?
Posted by: rgalla9146 Jul 11 2023, 07:26 PM
All correct parts AFAIK
Wide NORMA 54mm filler neck clamp
Collared filler tube sleeve/seal. Not a plain hose
Foam filler neck seal
Foam breather nipple seal
Rubber oil filter console seal with keeper ring
Missing is a flat rubber washer that goes between body of the car and the threaded
nipple at the bottom of the tank......at the right of the pic.
Also missing is the rubber hook grommit that Bob shows, it would slip over a stock
hose
<b>@http://www.914world.com/bbs2/index.php?showuser=5176 </b>
Morning, can you please share the part number for the oil filler neck NORMA clamp ?, I've looked and found a few 54mm clamps, but I'm unable to determine the correct width.
TIA,
Todd
Yes I'll provide the Porsche part number when I get home.
The pics show the correct Norma 54 mm clamp
Not sure the part number will be any use AFAIK the part is NLA
Also shown is the correct ribbed hose
Rory - You probably have a box of them stashed away, right?
The part number for the clamp is 999 512 073 02
The description in the parts manual is 54 / 25 Norma verz.
Mark...no box of them stashed away. I wish.
They're tough to find
Posted by: gandalf_025 Jul 12 2023, 07:39 AM
While I have the clamp out
I figured I’d take a picture of the
rubber gasket inside the clamp..
Posted by: T.Rick6 Jul 12 2023, 12:02 PM
While I have the clamp out
I figured I’d take a picture of the
rubber gasket inside the clamp..
Thank you for taking the time to photograph the clamp and gasket.
SunSet Porsche has the part number 999 512 073 02 listed as a clip, not a clamp.
I also contacted Clampo; they will make a custom clamp 54/25 for 1,200 with a 10 week lead time. NOT gonna happen. Still waiting on a response from Mishimoto.
Anyone have an extra they want to sell? I know, had to ask....
Todd
Posted by: T.Rick6 Jul 14 2023, 07:25 AM
While I have the clamp out
I figured I’d take a picture of the
rubber gasket inside the clamp..
Thank you for taking the time to photograph the clamp and gasket.
SunSet Porsche has the part number 999 512 073 02 listed as a clip, not a clamp.
I also contacted Clampo; they will make a custom clamp 54/25 for 1,200 with a 10 week lead time. NOT gonna happen. Still waiting on a response from Mishimoto.
Anyone have an extra they want to sell? I know, had to ask....
Todd
@http://www.914world.com/bbs2/index.php?showuser=10825
I found the clamps, not exact but close enough for me
https://www.schellen-shop.de/schlauchbefestigung/spannbackenschellen/normaclamp-s-bandbreite-20-mm-spannbackenschelle-din-3017?number=2000000159414
I've ordered 6ea, 1 for me, 2 for MEPSTEIN and will have 3 available to sell once received.
Todd
Posted by: mepstein Jul 14 2023, 07:42 AM
While I have the clamp out
I figured I’d take a picture of the
rubber gasket inside the clamp..
Thank you for taking the time to photograph the clamp and gasket.
SunSet Porsche has the part number 999 512 073 02 listed as a clip, not a clamp.
I also contacted Clampo; they will make a custom clamp 54/25 for 1,200 with a 10 week lead time. NOT gonna happen. Still waiting on a response from Mishimoto.
Anyone have an extra they want to sell? I know, had to ask....
Todd
@http://www.914world.com/bbs2/index.php?showuser=10825
I found the clamps, not exact but close enough for me
https://www.schellen-shop.de/schlauchbefestigung/spannbackenschellen/normaclamp-s-bandbreite-20-mm-spannbackenschelle-din-3017?number=2000000159414
I've ordered 6ea, 1 for me, 2 for MEPSTEIN and will have 3 available to sell once received.
Todd
Todd- thanks! Let me know how much and where to send send money.
Posted by: Mikey914 Jul 14 2023, 10:39 AM
Forward what you are using for quotation, I'd be happy to take a crack at it.
Mark
914Rubber.com
My email is mark@ the above
Posted by: saladin Jul 16 2023, 03:08 PM
@http://www.914world.com/bbs2/index.php?showuser=10825 and @http://www.914world.com/bbs2/index.php?showuser=23512 I found what appears to be the same clamp, https://belmetric.com/chp57band20-normaclamp-hex-slotted-drive-screw-clamp/?sku=CHP57BAND20 at https://belmetric.com/chp57band20-normaclamp-hex-slotted-drive-screw-clamp/?sku=CHP57BAND20. i ordered it and will see how well it works as a replacement for the OEM 901-107-679-10 NLA clamp that fits around the OEM 901-107-691-10 rubber filler neck boot, which is still available for around $36.
Thanks,
Ken
Posted by: mepstein Jul 16 2023, 03:31 PM
@http://www.914world.com/bbs2/index.php?showuser=10825 and @http://www.914world.com/bbs2/index.php?showuser=23512 I found what appears to be the same clamp, https://belmetric.com/chp57band20-normaclamp-hex-slotted-drive-screw-clamp/?sku=CHP57BAND20 at https://belmetric.com/chp57band20-normaclamp-hex-slotted-drive-screw-clamp/?sku=CHP57BAND20. i ordered it and will see how well it works as a replacement for the OEM 901-107-679-10 NLA clamp that fits around the OEM 901-107-691-10 rubber filler neck boot, which is still available for around $36.
Thanks,
Ken
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)