Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Replace 901 transmission

Posted by: tbone1819 Apr 18 2017, 09:05 AM

How hard is it to replcae? Do you need to remove the engine as well?

Posted by: rjames Apr 18 2017, 09:38 AM

No need to drop the engine.
Step by step can be found here on Pelican's site:

http://www.pelicanparts.com/techarticles/914_clutch_replace/914_clutch_replace1.htm

Posted by: Mark Henry Apr 18 2017, 10:03 AM

Sometimes it's just as easy to drop the engine and trans together. If you want to do some cleanup, valve adjustment, etc., on the engine just drop the whole thing.

Posted by: johnhora Apr 18 2017, 10:36 AM

QUOTE(Mark Henry @ Apr 18 2017, 08:03 AM)

Sometimes it's just as easy to drop the engine and trans together. If you want to do some cleanup, valve adjustment, etc., on the engine just drop the whole thing.

You already have the time consuming parts disconnected which are the axles and shifter...two more bolts, fuel line, and wiring harness and your done...
and it's easier to remove and reconnect the tranny and engine back together on the ground...

Attached Image

Posted by: tbone1819 Apr 22 2017, 07:15 AM

QUOTE(rjames @ Apr 18 2017, 11:38 AM)

No need to drop the engine.
Step by step can be found here on Pelican's site:

http://www.pelicanparts.com/techarticles/914_clutch_replace/914_clutch_replace1.htm

Thanks!!!!!!!