Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Rain tubes

Posted by: brooks944 May 9 2017, 02:26 PM

Hey guys, probably another dumb question, but how do the rain tubes attach to the body? The car is being assembled (the rain tray fits with the carbs!), and I cannot tell where the drain tubes fit to the body. Any pictures would be greatly appreciated!

Thanks, Rick

Posted by: The Cabinetmaker May 9 2017, 02:51 PM

The funnels bolt to rib on the body directly under the tray drain holes. M6 bolt and nut.

Posted by: Larmo63 May 9 2017, 07:29 PM

Don't over tighten or they will crack!

Posted by: brooks944 May 10 2017, 05:48 AM

Thanks

Posted by: saigon71 May 10 2017, 03:06 PM

Pics:

Attached Image

Posted by: cuddyk May 10 2017, 07:55 PM

...and if one does get cracked, just swap sides (driver to passenger or vice-versa). Only one of the two holes is used to attach to the car.