well..this saturday im cutting up my parts car (if anyone still wants to come, youre welcome, just pm me)
and i wanted to know if you guys were needing any chassis parts...
post a picture of what you need, when i cut up the car, ill tell you whether or not that part is any good (many parts are junk)
and then we can work it from there
RR suspension ear? I know it's prolly a longshot ( praying smiley )
Front weatherseal channel between the headlights?
Let me know. Thanks.
how 'bout a gud runnin' 2.0? C H E A P ! real cheap... cheaper'nshit...... (cain't git no cheaper n'dat)
......b
have any pressure plate bolts?
How about the piece that's missing in this picture?
Attached thumbnail(s)
front clip(front all the way to tank)
I'm still needing flapper/thermostat pieces, a pass-side seat rail, the "foam" foot rest that goes on the front firewall in 72+ cars...
QUOTE (Verruckt @ May 10 2005, 01:49 PM) |
RR suspension ear? I know it's prolly a longshot ( praying smiley ) Front weatherseal channel between the headlights? Let me know. Thanks. |
Thanks Aaron.
QUOTE (i love porsche @ May 10 2005, 04:22 PM) | ||
ill be sure to take a good look at the suspension ear, and see how good it is, ill take pics for you passenger or driver side? |
I'm looking for the drivers side front bumper mount.
gotcha
How about the metal around the front directionals? My fenders are dented in here and could use to weld in something better.
QUOTE (i love porsche @ May 10 2005, 04:22 PM) | ||
ill be sure to take a good look at the suspension ear, and see how good it is, ill take pics for you passenger or driver side? unfortunately no engine parts are available.. its a 1.7 and im using it for my project now...about the front clip, and the bumper mount i took part of the front trunk out, for my car, so im not sure if youre going to want the whole front clip...also, i think the fenders have a good amount of bondo on them, but nonetheless ill check and the bumper mount ill check also |
QUOTE (pjf @ May 11 2005, 05:47 PM) |
How about the metal around the front directionals? My fenders are dented in here and could use to weld in something better. bd1308 it seems people want lots of pieces from the front end...and the whole thing doesnt look that good anyways...sorry about this one |
I mean the signal buckets. The metal around the side markers is fine but it may be easier to cut out the metal including them. I've attached pictures of the left and right sides of the car to give you a better idea of what I need. I figure if you cut where its easiest for you, I should be able to do the same and weld your pieces in. Thanks for considering this. I was not looking forward to figuring out how to repair this part of my car. If you can do it, this will be a big help.
Attached image(s)
Being a newbie, I couldn't put both photos in one post so here is the left side photo. As you can see more damage on this side. Thanks again!
Attached image(s)
This:
Attached image(s)
sheet metal?
how about drivers side from sail panel down to door handle back to end of sail panel including into door jamb.
ok...bumper mounts...bad
suspension ear, bad
metal around the turn signal...good, ill get that off and send them
RS: which part of the picture do you need? where the screw holes are?
the entire rear fenders are bad, prettymuch all bondo and rust...this whole car was made of bondo it seems, its about as stiff as a wet noodle
QUOTE (i love porsche @ May 14 2005, 01:03 PM) |
RS: which part of the picture do you need? where the screw holes are? |
ill get the parts asap
look at how this car was put together, such great craftmanship
Attached thumbnail(s)
QUOTE (i love porsche @ May 14 2005, 04:03 PM) |
ok...bumper mounts...bad |
Thanks for cutting out the metal around the front directionals. Please send me an email (pfalabella@verizon.net) so we can make arrangements.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)