Well I have been cleaning up the passenger compartment trying to find out how bad my rust is. When I got to the PS firewall I found a nice little rust hole that I cut out....
and found this....
I'm sure this isn't the worst that anyone has ever seen, but it has really helped screw my last couple of weeks up
I'm open to suggestions on how to best fix this...
Bill
Call me.
QUOTE (Aaron Cox @ May 10 2005, 09:00 PM) |
Bill Call me. |
Thank you gentlemen for your quick replies.
Aaron, We'll take more Friday.
Scott, Just let me know when you are free. I should be open all weekend but I would need to rent a dolly to bring it over.
The hell hole has become my latest challenge. I thought all I needed to do was replace the battery tray but found more damage when I started wire brushing the rust off. Not as bad as Bill's but in need of repair for sure. Scott, you mention a kit that will repair the top of the frame??? I also was looking at Restoration Design today and agree that the engine shelf replacement does nothing for the top of the frame member. I'm a little further away than Bill so any written advice would help.
QUOTE (Michael J @ May 15 2005, 12:37 AM) |
The hell hole has become my latest challenge. I thought all I needed to do was replace the battery tray but found more damage when I started wire brushing the rust off. Not as bad as Bill's but in need of repair for sure. Scott, you mention a kit that will repair the top of the frame??? I also was looking at Restoration Design today and agree that the engine shelf replacement does nothing for the top of the frame member. I'm a little further away than Bill so any written advice would help. |
Welcome to the hell hole club
just to and and a little
and voila you have a like new car
I have spent hours looking at those two threads in particular. The pictures are worth a bunch. Thanks to you who have shared your journeys to hell and back.
Hmmmmm
M
QUOTE |
Hmmmmm idea.gif |
What Kit.
Marrrrrrrrrrrrrrrrrk???
You gotta really love your car to attack that... 'specially if you live in the land of Fruits'n'nutz... where 914 parts grow on trees.
QUOTE |
You gotta really love your car to attack that... 'specially if you live in the land of Fruits'n'nutz... where 914 parts grow on trees. |
I will post a pic later of the pieces - This is gonna be a CSOB hell hole kit - will require you to form the flanges and weld it into the car. Skline has one and is working on verifying the size / fit etc. Not really gonna do anything until he gets back to me. Then you will see a post.
M
Both Sides?
The hell hole is always the battery side. That what I made parts for - the battery side. I suppose you could flip some of them to fit the drivers side - I would need to make a new part for the engine tin on that side though.
M
I vote both Mark,
I realize the battery side can be the worst but I always knew them as "plural" Hell Hole(s). Both sides have the same features which are;
Recesses, inside the engine compartment where most PO's don't or haven't gone, that trap leaves, that plug drains that lead to sitting wet leaves and standing water, which leads to rust. But you knew all this...
I was looking at this job wishing and praying for someone to come along with stampings or what-not for this.
Pretty-Please?
P.S. If you need someone to test fit the drivers side...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)