I'm replacing my floorpans, as well as the piece that goes along the firewall on the interior, stretching between the longs. I have drilled out all of the spotwelds that I have seen. I have taken my airchisel and physically seperated the piece from the firewall, but it seems stuck in the middle. This piece that that I call a "ledge" where the backpad connects, are there more spotwelds on the horizontal part of this that need to be drilled out??? I have stripped the paint, but don't see any. WTF???
yes ...
it has two round "recesses" (for the lack of a better word) that match 2 similar "recesses" on the backside of the firewall.
those are spotwelded together in the center ...
Andy
here you go ...
Attached image(s)
QUOTE (SirAndy @ May 12 2005, 04:32 PM) |
yes ... it has two round "recesses" (for the lack of a better word) that match 2 similar "recesses" on the backside of the firewall. those are spotwelded together in the center ... Andy |
QUOTE (SirAndy @ May 12 2005, 04:34 PM) |
here you go ... |
What a bitch!!! There were only about 20 more spotwelds besides the 4 in each one of those round recesses
Fuching anal retentive Germans (sorry mom )
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)