Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ GB almost Over Ski rack plugs GB $9.14 for all 6! All GBs end July 1st $20 Get them now
Posted by: Mikey914 Jun 15 2017, 08:16 AM
Yes we have some more parts that we have noticed many were painted over or just completely missing. Official announcement tomorrow!!!
Posted by: Mblizzard Jun 15 2017, 08:47 AM
My credit card can't wait!
Posted by: Mikey914 Jun 15 2017, 11:05 AM
This one won't make much of a dent. But I'd bet at least 50% of the 914 owners don't know they are missing or they are even there / not there.
Posted by: Optimusglen Jun 15 2017, 11:08 AM
This one won't make much of a dent. But I'd bet at least 50% of the 914 owners don't know they are missing or they are even there / not there.
In that case, MY credit card can't wait.
Posted by: SirAndy Jun 15 2017, 11:15 AM
Yes we have some more parts that we have noticed many were painted over or just completely missing. Official announcement tomorrow!!!
I can confirm that the product in question is of great quality!
PS: And yes, mine were missing too ...
Posted by: Mblizzard Jun 15 2017, 11:22 AM
![popcorn[1].gif](style_emoticons/default/popcorn[1].gif)
Posted by: 76-914 Jun 15 2017, 11:24 AM
Yes we have some more parts that we have noticed many were painted over or just completely missing. Official announcement tomorrow!!!
I can confirm that the product in question is of great quality!
PS: And yes, mine were missing too ...
They're probably in Mike's (MoveQik) trunk or garage.
Posted by: 7TPorsh Jun 15 2017, 11:28 AM
The little bushing inside the engine cover hinge?
Posted by: NoEcm Jun 15 2017, 11:28 AM
I don't even know what the part will be but being a 914 parts junkie (and hoarder) I'll take one. 
Posted by: tygaboy Jun 15 2017, 11:38 AM
Yea! Go 914 Rubber! Someone should give these guys an award! 
Posted by: rhodyguy Jun 15 2017, 11:54 AM
The white plastic flexible wire protectors for the holes in the front trunk? The only "they" that are never where they are supposed to live that i can think of.
Posted by: Frankvw Jun 15 2017, 12:24 PM
it will be the small plastic wheel in the enginelid mechanism for sure, I know I miss it, but I miss one (50% )......
Posted by: LowBridge Jun 15 2017, 12:30 PM
... the waiting is going to kill me... love the 914rubber team
Posted by: 76-914 Jun 15 2017, 01:04 PM
The white plastic flexible wire protectors for the holes in the front trunk? The only "they" that are never where they are supposed to live that i can think of.
They already have those in stock. Saw them last week.
Posted by: Steve Jun 15 2017, 01:19 PM
Bumper top spacers?
Posted by: ConeDodger Jun 15 2017, 01:58 PM
OH COME ON!!! 
Is it tomorrow yet?
Posted by: boxsterfan Jun 15 2017, 02:12 PM
I can NOT wait!!! Please divulge the information!!! This is torture!!!
Posted by: Mblizzard Jun 15 2017, 02:32 PM
OK i will take 2 just tell us!
Rubber grommets for engine tin?
Posted by: bbrock Jun 15 2017, 03:08 PM
The white plastic flexible wire protectors for the holes in the front trunk? The only "they" that are never where they are supposed to live that i can think of.
They already have those in stock. Saw them last week.
Funny, the other day I was puzzling over how to replace one of those when later the same day, I pulled open a little organizer bin draw where I threw miscellaneous doo-dads and found two exact replicas of that stuff. Funny thing is that I have no clue where they came from except that it had nothing to do with Porsches. Just one of those lucky things I guess.
Posted by: Brian Mifsud Jun 15 2017, 03:30 PM
The duckbills on the body drains under the car?
These get all crusty then won't open, then bits of leaves get backed up and rot your car out..
Better to just pull them out and leave the holes open, just don't try to drive through deep puddles....
Posted by: ahycaramba Jun 15 2017, 08:01 PM
Easy Peasy everybody!!!! It has to be the long awaited WAS tops.
count me in
Posted by: Rand Jun 15 2017, 08:05 PM
Genius marketing. I didn't know it was cool to use that here in the garage. There's a vendor forum for that.
But great guys, company and products, so...
Posted by: 914Next Jun 15 2017, 08:22 PM
I'm taking the challenge Mark. I think I have it! er.......whatever it is.
Posted by: falcor75 Jun 15 2017, 10:16 PM
If it doesnt make my car faster, lighter or more reliable, I dont need this one !
Posted by: Mikey914 Jun 15 2017, 11:17 PM
Actually going to be 2 announcements as we just finished and got another new tool running today. One is no big surprise. The other is a wow didn't know those existed (at least for many).
Gonna post up in the morning with a few other carry overs for those that may have missed them.
Mark
Posted by: wes Jun 16 2017, 01:05 AM
Ok it's 12:03 what's up!!
Ha ha! Back in the morning.
Posted by: Matty900 Jun 16 2017, 02:04 AM
Is it a Shot-Ski??
Attached thumbnail(s)
Posted by: kgruen2 Jun 16 2017, 02:24 AM
Cool. Is it the plastic trim that goes on the center console slot for the heater lever? I could use one of those.
Posted by: Porschef Jun 16 2017, 05:00 AM
Cool. Is it the plastic trim that goes on the center console slot for the heater lever? I could use one of those.
+1
Posted by: Mblizzard Jun 16 2017, 05:38 AM
ITS MORNING!
Well at least here it is. Guess we will have to wait for the west coast morning to find out.
Posted by: PanelBilly Jun 16 2017, 07:32 AM
It morning here too
Posted by: SirAndy Jun 16 2017, 07:37 AM
Let me check real quick ...
Yepp, morning here too.
Posted by: bdstone914 Jun 16 2017, 07:41 AM
I know what they are. Not telling. There are 6 on each car.
Posted by: Jeff Bowlsby Jun 16 2017, 07:51 AM
I know what they are. Not telling. There are 6 on each car.
Nice way to frame a tech question for an event..
Foglight ring retainer clips?
Nylon taillight housing nuts?
Speedbleeders for the late cars?
HE to muffler bolts?
Posted by: ConeDodger Jun 16 2017, 07:52 AM
I'm awake!
Posted by: bretth Jun 16 2017, 08:13 AM
Gah! I need it, I want it. What is it?? 
Posted by: Mikey914 Jun 16 2017, 09:41 AM
Here's the 1st and main announcement -
SKI RACK PLUGS for the roll bar a set of 6 on sale for 9.14 !
We have also finished the stacked elbow Just need to get it listed.
We are also adding a few other small item you may want to pick up on sale to entice you.
They are :
The jack strap rubber with metal
Door air vents
windshield wiper grommets
Blake will be listing the stacked F elbows later this morning, but 1st we have to drop Taylor's car off at Cary's fro some rust repair.
Attached thumbnail(s)
Posted by: Mikey914 Jun 16 2017, 09:42 AM
After
Unless yours looks like this
Attached thumbnail(s)
Posted by: Mikey914 Jun 16 2017, 09:48 AM
Links for now.
Blake will have to add the staked elbow after lunch
Ski rack plugs -
http://shop.914rubber.com/Caps-for-Ski-Rack-mounting-holes-set-of-6-OEM99970308740.htm?categoryId=-1
Jack strap rubber
http://shop.914rubber.com/91472202110-Jack-strap-with-hardward-stainless-set-of-2-91472202110.htm?categoryId=-1
Door jamb vents
http://shop.914rubber.com/Door-air-vent-grill-91455504310-with-filter-1-91455504310.htm?categoryId=-1
Windshield wiper grommets
http://shop.914rubber.com/Windshield-wiper-Grommet-set-of-all-4-914WGS4.htm?categoryId=-1
Stacked elbow to follow after noon Pacific
Attached thumbnail(s)
Posted by: Shadowfax Jun 16 2017, 10:02 AM
Here's the 1st and main announcement -
SKI RACK PLUGS for the roll bar a set of 6 on sale for 9.14 !
We have also finished the stacked elbow Just need to get it listed.
We are also adding a few other small item you may want to pick up on sale to entice you.
They are :
The jack strap rubber with metal
Door air vents
windshield wiper grommets
Blake will be listing the stacked F elbows later this morning, but 1st we have to drop Taylor's car off at Cary's fro some rust repair.
My car has these intact! Unbelievable
I'm in on the stacked elbow though.
Posted by: Elliot Cannon Jun 16 2017, 10:12 AM
The holes for my ski rack are being used for my bike rack.
Attached image(s)
Posted by: LowBridge Jun 16 2017, 10:14 AM
ordering my jack straps now...
Posted by: ValcoOscar Jun 16 2017, 10:24 AM
Cool...Just placed me another 914RUBBER order!!!!
Thanks
Posted by: Mikey914 Jun 16 2017, 11:35 AM
The holes for my ski rack are being used for my bike rack.
Very nice. So were they there before, and if so did they fall apart when removed?
Posted by: 76-914 Jun 16 2017, 12:20 PM
Mark, are these made from silicon like your dash and roll bar plugs? I really liked your silicon plugs more than the OEM plastic ones. A free plug, no pun intended!
Posted by: Steve Jun 16 2017, 12:25 PM
What about the bumper top spacers? I couldn't find them on the web site
Posted by: sbsix Jun 16 2017, 12:40 PM
I discovered mine were missing a couple of years ago and found 6 used ones at EASY from a wrecked 914. But to get fresh new ones is a treat. Thanks Mark!
Posted by: Mblizzard Jun 16 2017, 01:48 PM
CRAP! He got me again! No Ski plugs.
Posted by: jim_hoyland Jun 16 2017, 02:29 PM
Great ! Sending in another order...
Posted by: Mikey914 Jun 16 2017, 03:29 PM
Mark, are these made from silicon like your dash and roll bar plugs? I really liked your silicon plugs more than the OEM plastic ones. A free plug, no pun intended!
Made like the OEM so they can take paint. Different tool, it's a plastic injection tool or I could just pull in silicone. Sorry
Posted by: Mikey914 Jun 16 2017, 03:31 PM
What about the bumper top spacers? I couldn't find them on the web site
Right here put them on sale too for ya!
http://shop.914rubber.com/Bumper-Top-Rubber-Base-Set-OEM91455911610.htm?categoryId=-1
Attached thumbnail(s)
Posted by: ConeDodger Jun 16 2017, 04:13 PM
Shoot! I lost most of a nights sleep and guess what? Mine are still there.
Posted by: Elliot Cannon Jun 16 2017, 04:42 PM
The holes for my ski rack are being used for my bike rack.
Very nice. So were they there before, and if so did they fall apart when removed?
I had to clean the ski rack holes with a tap. (Just a bit of rust). I made the blocks (rather crudely) from some aluminum I had laying around. I got some Yakima bike rack parts to finish it. Here's a pic with the bike on the rack taken at the 2005 WCC. Twelve years and twenty pounds ago.
Attached image(s)
Posted by: Mblizzard Jun 16 2017, 05:22 PM
Order placed!
Posted by: Larmo63 Jun 16 2017, 05:32 PM
Not too many of these rubber gaskets around.....
By the way, I made Mike D. buy his set of factory ski racks from me a few G & R's ago. I think he is glad he did. 
Posted by: Mikey914 Jun 16 2017, 05:41 PM
Not too many of these rubber gaskets around.....
By the way, I made Mike D. buy his set of factory ski racks from me a few G & R's ago. I think he is glad he did.
Make me a template be happy to knock a few out for you thanks Mark
Posted by: Steve Jun 16 2017, 06:47 PM
What about the bumper top spacers? I couldn't find them on the web site
Right here put them on sale too for ya!
http://shop.914rubber.com/Bumper-Top-Rubber-Base-Set-OEM91455911610.htm?categoryId=-1
Thanks Mark!! Order placed!!
Posted by: arne Jun 16 2017, 07:12 PM
Oddly enough, my car still has them and they aren't painted over either. Hmm, looks like that might be a good spot to get a paint match from.
Posted by: edge540 Jun 16 2017, 07:54 PM
do you make the rubber "bridge" for the fuel tank strap?
Posted by: Mikey914 Jun 16 2017, 11:43 PM
Haven't yet completed, but underway.
Posted by: Mikey914 Jun 17 2017, 12:06 AM
Blake got sidetracked but here is a picture I asked him to take. may need to retake as it's at a weird angle.
Attached thumbnail(s)
Posted by: brownaar Jun 17 2017, 10:17 AM
Blake got sidetracked but here is a picture I asked him to take. may need to retake as it's at a weird angle.
BEAUTIFUL!!!!!
Posted by: Mikey914 Jun 17 2017, 10:55 AM
Made these from the same compound factory did. Took a little research, but there is a reason they used what they did. Should last a long time. I understand why the others have had issues with their reproduction of this part. Took a little longer but worth the wait.
Posted by: brownaar Jun 20 2017, 05:56 PM
Vacuum stack elbow listed yet? I can't find it.
Posted by: Mike D. Jun 21 2017, 05:04 PM
It's got to be better than this piece of crap from AA
This is their brand-new $25 reproduction BTW.
Attached thumbnail(s)
Posted by: Mikey914 Jun 22 2017, 07:03 AM
Aaaaahhh WTF?????
Yes!
This is the technology we were using 8 years ago. Hand casting in silicone molds. It will make the shape but is limited. There are also techniques you can use to eliminate most of the bubbles, but it does cost a little more and required equipment to do it.
Blake should have these up later this morning. I'm in training and he was off the last 2 days, but yes I'll make sure he gets these up on the site today and post a link (with a few more pictures too).
Posted by: championgt1 Jun 22 2017, 09:51 AM
It's got to be better than this piece of crap from AA
This is their brand-new $25 reproduction BTW.
I got one of those too. I keep it as a reminder to never buy anything from them again. What a piece of shit! The fact that you would put that on your shelves and then sell it to someone blows me away.
Mikey yours looks amazing!!
Posted by: Mikey914 Jun 23 2017, 07:17 AM
Well at least you won't have to buy that anymore.
Posted by: Mikey914 Jun 23 2017, 11:03 PM
NEW LISTING IS LIVE NOW
Sale running until the end of the month!
Check it out http://shop.914rubber.com/Branch-Piece-Air-Distributor-OEM-022129637B.htm
Attached thumbnail(s)
Posted by: brownaar Jun 25 2017, 08:39 AM
NEW LISTING IS LIVE NOW
Sale running until the end of the month!
Check it out http://shop.914rubber.com/Branch-Piece-Air-Distributor-OEM-022129637B.htm
YOU ARE DA BOMB!
Posted by: Mikey914 Jun 26 2017, 12:01 AM
Actually thank Blake I've been away in training this last week.
Posted by: brownaar Jun 26 2017, 05:29 AM
Thanks, Blake!
Guss I shoulda said-YOU GUYS ARE DA BOMB.
I was just excited about the quality of the product, as usual, and the GB price. I bought three. I only need one.(For now. They do eventually wear out and since I'm keeping my teener forever....)
Posted by: Mikey914 Jun 26 2017, 07:30 PM
Not a bad idea to stock up on these they will be $20 after the end of the month.
Posted by: Mikey914 Jun 30 2017, 12:09 AM
Sale about to close !
Posted by: theer Jun 30 2017, 10:39 AM
Sale about to close !
Did I miss it? Prices on website have changed?
Posted by: Mikey914 Jun 30 2017, 10:52 AM
Sale about to close !
Did I miss it? Prices on website have changed?
No haven't changed yet - Still $9.14 with the metal for the stacked elbows
http://shop.914rubber.com/Branch-Piece-Air-Distributor-OEM-022129637B.htm?categoryId=-1
The ski rack plugs I did need to reset the discount on as it expired a day early, but you are good to go now!
http://shop.914rubber.com/Caps-for-Ski-Rack-mounting-holes-set-of-6-OEM99970308740.htm?categoryId=-1
Posted by: theer Jun 30 2017, 10:54 AM
No - I meant the others: ski rack plugs and jack strap.
Posted by: Mikey914 Jun 30 2017, 11:01 AM
looks like the jack rubber was also off. Fixed now -
http://shop.914rubber.com/91472202110-Jack-strap-with-hardward-stainless-set-of-2-91472202110.htm?categoryId=-1
Posted by: theer Jun 30 2017, 11:07 AM
Woo hoo! Order placed. Thanks, 914Rubber
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)