Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ pressure plate bolts
Posted by: JFG Jun 20 2017, 09:33 AM
These are the m8 x1.25 x 6 fitting the pressure plate to the flywheel. I've been to porsche and they are showing as nla with no superceded part number. Can i use high tensile bolts grade 8.8 as these are available from an engineers supplier shop close by?
Posted by: stugray Jun 20 2017, 11:55 AM
QUOTE(JFG @ Jun 20 2017, 09:33 AM) 
These are the m8 x1.25 x 6 fitting the pressure plate to the flywheel. I've been to porsche and they are showing as nla with no superceded part number. Can i use high tensile bolts grade 8.8 as these are available from an engineers supplier shop close by?
Yes you can use generic 8.8 Bolts.
The shear that they are under out at the edge of the pressure plate is nothing compared to that of the Flywheel bolts.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)