Hello all! I am just finishing up the cleaning and inspection of my torn down engine, a stock 2.0L 76. I am planning on rebuilding it as a 2.0L with a Microsquirt taking care of fuel and spark. Inside of the engine the only "upgrade" I will be going for is a more modern cam.
While I am finding companies that provide complete rebuild kits, some of my parts like the crank are still good, and don't need to be replaced.
I am looking for companies that will help me build a complete kit around the parts I don't need to replace.
Any and all suggestions are welcome and appreciated.
Jim
You can get a list of parts you might want by talking with those guys at 914World.com. They sometimes know what they're talking about.
I'll start off the questions:
Why build a stock 2.0 and not a 2056?
A 2056 kit would be fine. I am just not looking to try to squeeze every possible HP out of this engine. I will be happy with a solid runner that I don't have to have always running on the edge of engineering perfection.
It's just that stock pistons and cylinders are the same price as 96mm. So take the free upgrade.
Thanks for the info. I have followed some of the MS discussions on here, and know that McMark has been a positive contributor to all of the discussions. I haven't contacted him because it says on his site that his MS setups are only for his engine customers, and the engine services he has listed are not for just selling parts, but for the building of engines for his customers.
If there are other options not list on his web site I will be a very happy guy.
I've heard Mark doesn't really answer his phone.
I'm not doing product sales anymore. They're generally too low in the cost/benefit department. But I'm contemplating posting all my 'secrets' instead.
The MicroSquirt is a perfect example, because me selling you a pile of parts skips the process where you learn the how and why. So when something goes wrong you're stuck trying to learn in reverse, which is harder. Then I spend a bunch of time helping troubleshoot the issues and then the cost/benefit really tanks, purely from a business perspective.
So I'd much rather spend time posting the info here, in these sorts of threads, where multiple people can benefit from the discourse -- and hopefully I can learn something from someone else as well.
Okay, back to the engine...
You're starting with a stock 2.0.
-->Your'e rebuilding the 2.0 heads? Ideally you'll build the shortblock and measure deck height before getting the heads rebuilt so you know what compression ratio you're at, in case you want your heads flycut farther.
-->How do you know the crank is good?
Rods should be rebuilt pretty much every time.
Sounds like the beginning of a great thread!
Sorry for the long delay in replying. Family and life got crazy, but now that most of the troubles are over, I can get back to my fun stuff.
McMark
The reason I know my crank is still good is because I have had it inspected and polished at a local machine shop. I wouldn't know onerwise. Not much machine shop in my veins.
As with most if my rebuild, I am getting as much done locally as I can for my engine, but I just couldn't find a supplier.
Just one week before I started my vacation I had a new business move on to my route ( I am a UPS driver ) called Deutschmark auto. They are a supplier if VW parts. When I asked if they could get me parts for a 2L type 4 the owner said sure, and that he had a 914 and about enough parts to make three cars right in the back of his warehouse. For a moment I thought he was being a smart ass so I checked, he really does! So I guess my supply issues are solved.
Thanks for all of the input, not just on this post, but on all of the discussions on here that I get to read through to increase my knowledge .
Jim
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)