Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ GT Build

Posted by: cal914 Jun 25 2017, 01:09 PM

I've been looking to have a GT built since i first got into 914s,wanted it to be period correct so purchased a 71 shell from a great guy in Denver Colorado,Steve Lindholm,so back in November 15 the car was delivered to start its transformation ,its now June 17 and the car is almost complete.Not great with putting pics up but if this is successful i'll put pics up of the whole resto so here goes Attached Image

Posted by: mb911 Jun 25 2017, 01:10 PM

I can't wait to see updated pictures

Posted by: cal914 Jun 25 2017, 01:46 PM

Here's a few pics of the #36 just before media blastingAttached Image Attached ImageAttached ImageAttached Image After blasting a lot more rust was revealed
I'll continue putting pics up over the coming weeks,thought i'd do it once she's nearly complete then you get to see the whole story in a shorter space of time,by the way shes called the #36 as that is the number we chose to put on her when complete ,hope you enjoy

Posted by: cal914 Jun 26 2017, 01:18 PM

Here's a few bits i bought before the build started some good some not so goodAttached Image Attached ImageAttached Image Attached Image
Here's the livery we first thought we would have but we changed our minds several timesAttached Image

Posted by: cal914 Jun 27 2017, 01:26 PM

After coming back from media blasting there was quite a bit more rust than I'd hope for but not as bad as it could have been
Attached Image Attached Image Attached Image Attached Image
The battery tray and hell hole where in quite bad condition
Attached Image
The jacking point was in quite bad condition but the longs weren't in that bad a state
Attached Image
Attached Image

Posted by: mlindner Jun 27 2017, 03:31 PM

Cal914, thats a pretty good looking shell. You will have fun with that. Best, Mark

Posted by: cal914 Jul 3 2017, 01:14 PM

Once back the new floor pan went in

Attached Image Attached ImageAttached ImageAttached Image Attached Image

Posted by: 914dave Jul 3 2017, 01:48 PM

Looks like you have all the proper bits! You've got this!

Posted by: larryM Jul 4 2017, 12:33 PM

chowtime.gif - $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$


??????????????????????????????????????

Posted by: cal914 Jul 4 2017, 01:35 PM

Full cost not on yet ,but should be once i complete this thread

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)