Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Transmission shift rod removal

Posted by: rad23racer Jul 6 2017, 09:28 AM

I'm trying to remove the shift rod from the linkage on the transmission so I can replace the bushing that is destroyed. I pulled the tapered screw out but this thing doesn't want to budge. Before I get creative, I thought I would check and see if there is a trick to getting the rod out.

Thanks...

Posted by: bretth Jul 6 2017, 09:34 AM

QUOTE(rad23racer @ Jul 6 2017, 11:28 AM) *

I'm trying to remove the shift rod from the linkage on the transmission so I can replace the bushing that is destroyed. I pulled the tapered screw out but this thing doesn't want to budge. Before I get creative, I thought I would check and see if there is a trick to getting the rod out.

Thanks...


On mine I just shifted between 2nd and 3rd a couple times and it just came off. Maybe you need to hold back on the shaft while someone pulls the shifter back. Remember not to reuse the screw because they can come loose.

Posted by: 914Sixer Jul 6 2017, 09:54 AM

Another option for the cone head screw is to us a standard square head VW Beetle shift rod screw.

Posted by: bdstone914 Jul 6 2017, 03:50 PM

Twist the shift rod at the coupler to break the tension. put the shifter in 2nd or 4th. with one person at the shifter get under the car and open up an adjustable wrench to slide onto the exposed part of the front shift rod. have the person inside pul the shifter back to break loose the coupler from the front rod. might take a couple of smacks.

Posted by: ndfrigi Jul 6 2017, 06:35 PM

I used one like this.

Attached Image

Posted by: rad23racer Jul 6 2017, 06:38 PM

QUOTE(ndfrigi @ Jul 6 2017, 05:35 PM) *

I used one like this.

Attached Image


Sometimes I just feel like a moron. The puller should work nicely. I forgot to mention that the transmission and shift rod are out of the car sitting on the workbench so I have easy access to them.

Thanks everyone for your help. I'll let you know how it goes.

Posted by: rstover Jul 6 2017, 06:46 PM

Make sure the screw is out far enough. It has to be nearly all the way out.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)