So I have checked pelicanparts, aircooled.net, summit racing, gpr parts, and local auto stores. None have the points that is on my dizzy. It's a bosch dizzy and the part number is illegible. The engine is a 1970 or a year up or down and I am not sure if the dizzy is from the same year as the engine either. All the points I have looked at attach 180 degrees opposite of mine. I appreciate any help I can get finding the points or if someone has a set I can buy from them.
Picture is for a reference if it helps anyone.
Attached thumbnail(s)
Some one on the pelican 911 forums has one they are sending me, so if an admin can delete this post please.
partsgeek shows both bosch and beru points for about $7.00. hardly a unicorn part.
70 motor running a bosch must be one fitted later,Marreli started that year depending on engine build date,not hard to find as stated,not sure why people run points anymore as there are SO many provide better options,even more important if you don't have a firewall cutout .
Anyway your car do as you like .
let me restate the obvious, clean that shit off the plate. intsall new points and go from there. i run points in my motorcyles and cars and dont have problems, did i mention , they run?
Switched all 3 911s and my 6 to Pertronix. No muss, no fuss, unless you need to be period correct.
No debate here about Petronix I bet they are good.
I use the Crane optical. Could never get points to work in that same distributor. Suspect that as the vacuum retard plate wears and gets sloppy, it "readjusts" your point gap just enough to cause problems. The optics seem much more tolerant of this variable slop. I suspect the Petronix would be also.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)