Hello everyone! New Member here.
I just acquired a 914 engine that was disassembled 4747.
I purchased it and was told it was a 1970 2.2T motor and wanted to build it as a project back to original specs that is still my plan unless someone needs it.
I would also be interested in some opinions. Since when I purchased it and it was represented as a 1970 911 2.2T motor and it is a 914-6 motor did I get the better end of the deal? which motor is more valuable?
The 914-6 engine will be more valuable to the right person, IMHO. But you may have to sit on it awhile to get that 'good' selling price.
Unless parts on the engine are reusable, there are a few upgrade paths that can be fun, but cost/benefit would encourage you to start with a bigger engine rather than spending lots of money on a small motor build.
The 914-6 2.0 and the 2.2T motors are pretty close in value I think.
Unless, of course, the owner of the 914-6 that previously had that exact engine decides to bring their car back to numbers matching. Then I think the 2.0 would be worth quite a bit more.
If someone was restoring a 914-6 and wanted the correct engine but non-numbers matching, I wonder what that would do to the value.
Yes the engine number is 6404747
you'd be looking for a car with a vin around 914043 1344
The 914-6 never came with a 2.2 motor from the factory, though some previous owner may have enlarged the bore during a rebuild. I'd agree that the engine would only be particularly valuable to the owner of the matching car.
I wish he would answer the question as to what the complete motor number and type is.
A 914/6 engine is not very powerful and anyone doing a conversion would probably chose sometime of a larger displacement because it cost about the same to rebuild a 3.0 L as it does to do 2.0L. I am not disparaging these engines but just trying to put a realistic value because I see people charging over $1500 for a case and as far as I am concerned that is nuts unless you own the car it belongs to. If you rebuild a 914/6 engine then you are raising the price that the owner of the car it belongs to has to pay and not knowing your abilities as an engine builder might make that a hard sell.
Actually more specifically around #1368...if numbers are assigned sequentially. My car is #1670 / Engine #5049
Tony
PS: I've done a fair amount of research and the added value for a matching number package in a Porsche isn't that substantial - not like the old "muscle cars" of old. As said previously, their isn't allot of value either way. The "bonus" of having matching numbers ranges from 5 to 10 percent. Their is the value to the right person and then only maybe...
Mark - I agree if we are talking "end of the rainbow" builds...like the guys who only will look (etc, etc). Those builds ultimately eclipse what the cars actually worth (and the market has softened already). That to me is not what real world, normal trading takes place - not for 914's anyway.. We can all agree owners can ask whatever they want...I have seen "those" cars sit idle.
PS-Typing on phone from the beach...pleasr excuse tupos!
Tony
[quote name='mepstein'
I disagree. It depends on the car but I'll say a good 20% for the people who find it to be important.
[/quote]
IMO the valve of the engine is less in the OP's case because it has been dissembled,been burn in the past buying engines this way ....theres always some parts missing or parts rusted due to poor storage....parts get damaged also.
At the end of the day its what someone will pay.
I believed someone asked for more info on the case, here is what I know.
901/38
6404747
901.101.101.3R
I hope this helps!
More and more this seems to feel like a thinly veiled classified ad...
I don't know where that came from. I was just looking for some advice to justify if I got taken on the purchase of a 914/6 motor that was presented as a 911 2.2T motor. you can verify this if you would like I purchased it on ebay about a week ago. It was listed as a 1970 2.2T motor for $3500. You should not make assumptions. The case is not for sale if is a bad deal for me I can return it to the seller.
Assumptions sometimes are wrong but the line of questioning from a brand-new Newbie can be suspicious. No harm no foul - enjoy your new motor!
Tony
What Cracker/Tony said.
No worries! Just trying to get some information from guys that know this stuff. Trying to figure if I was to build a race motor which one would be the right one. It sounds to me like the 914/6 block being rare should stay factory specs. since it came with the correct heads, crank, cams, carburetors it would be easy to achieve that.
As far as a race motor I have been told a 3.0 b/c the 2.7s are unreliable. Please any opinions would be appreciated. Trying to stay a bit old school.
The 3.0 is the one to build into a race motor. Super strong aluminum case. Our 962 uses a 3.0 case and puts out over 700hp.
The 914-6 case is the same as the '69-911S. That engine had 185-190hp, stock. You will need to work the heads and use S cams and pistons but it's certainly not a throw away engine.
If it was the rusted engine that I saw for sale I would return it ASAP. If it is an engine that turns with webers you probably did alright...it would be helpful to post pictures.
The 2.7 is not unreliable it just needs same retro-fitting while being rebuilt to prevent head studs from pulling. IMHO the 3L, 3.2L or 3.6L are the best bang for the buck.
Find its home and it might as well be made of gold. Otherwise, its going to hold down garage space... So if gravity fails us, you made a good investment.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)