So, how far do you push the pedal before you get action?
Mine goes about 1.5 inches and then gets very firm with very good stopping power.
I'm still with prop valve, you should know.
If I replace the rubber lines with SS, I'll try the "tee".
KT
Hello?
25 views by nobody with brakes?
tell me about your pedal.
KT
fine. but then i go back to studying.
19mm MC
M calipers
stock rears.
moves about an inch or so, and 1.5-2 inches says lock up.
going to volvo 4 piston calipers up front next month, and replacing my p valve with a teee.
currently my rears do shit!
so. back to studying
check your pushrod freeplay...
I thought of that, but was to lazy to remove the pedal board...
KT
Mushy pedal? I don't think I've heard of that in 914Land.
I'm going about 4 inches. The longer the better right?
My name's Mark and I have air in my brake lines.
Speaking of brakes...How long will brake fluid last in an unopened can? Factory seal still in place?
Thanks
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)