Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Keeping it cool!
Posted by: Localboy808 Aug 10 2017, 09:33 PM
So over the next few weeks I will be putting my motor back together. I'll be painting the engine compartment first. I will change all the engine bay seals. I've been searching around I can't seem to find a replacement seal that goes on the piece of engine tin against the oil cooler. Is this available anywhere? Any advice would be appreciated! At this time I don't want to do a remote cooler just yet. The motor is a 1.7 case. 1.8 heads and changing the pistons and jugs to make it a 1914? It's got dual 40 Kads at the moment. An an 009.
Scott
Posted by: Mblizzard Aug 11 2017, 12:58 AM
So over the next few weeks I will be putting my motor back together. I'll be painting the engine compartment first. I will change all the engine bay seals. I've been searching around I can't seem to find a replacement seal that goes on the piece of engine tin against the oil cooler. Is this available anywhere? Any advice would be appreciated! At this time I don't want to do a remote cooler just yet. The motor is a 1.7 case. 1.8 heads and changing the pistons and jugs to make it a 1914? It's got dual 40 Kads at the moment. An an 009.
Scott
914 Rubber. Call if you cant find on web site.
Posted by: 914Sixer Aug 11 2017, 06:52 AM
The seal comes on new coolers. Go to the big box stores and get a roll of weatherstrip. Should do the job.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)