I'm considering purchasing a set of deep 6's. I'm confused as to the differences between the "flat" and "deep" 15 x 6 wheels. I understand they are deeper dish but what does that actually mean in terms of fitment? Both are 6 inches wide and have an offset of 36 and a backspace of 112. To me (I may be wrong, that's why I'm asking), that means the fitment, measured from the inner lip of the wheel well to the outside lip of the rim is exactly the same for both wheels. If so, when why are the deep 6's all the rage? Because they look "deeper"? See the reference chart below.
Educate me please!! Thanks. If this topic has been covered here before, my apologies.
Greg
Attached image(s)
I believe its in looks only that there is a difference.
Where the center meets the rim flat's are 20mm deep and deep's are 43mm.
Some like the look of the deep Fuchs, too me it's only really noticeable on fully polished rims. Fitment is the same.
For me if you're getting a deal sure, but if the price difference is huge I'd go for the flats.
There's also the euromiesters Fuchs in 16" and 17", way cheaper and better tire selection.
I'm seriously thinking about selling my real flat 15" as soon as my tires are done.
Deep 6s came on the early cars up to 71.
Some didn't have the safety bead.
Huge price difference but they will probably just go up in value.
I currently have a set of flat 6's that need to be refinished. I was looking at a set of fully finished, TUV approved, reproductions at 350.00 each. That's nearly the cost of refinishing each of my wheels alone. I was hoping the deep 6's were offset slightly outward toward the inner wheel well, to increase the tire track width. Looks like I will keep my OE Fuchs.
Thanks!
Greg
Check out Maxilite Fuchs wheels.
Just to be clear, looking at Mark Henry's picture, the deep Fuchs is on the left and the flat Fuchs is on the right, correct?
FYI I like my flat Fuchs (part # 911.361.020.10), refinished by Harvey.
Deep sixes might be lighter and are very expensive. Some also have what is refereed to as with hearts which describes the opening around the valve hole. Some do not have hearts. The heart wheels tend to bring more money.
I was lucky a few years ago to find a set of four deep sixes with hearts for $400.00 I assumed they were reproductions, but to my surprise when I went to buy them they were OEM Fuchs !!! Cha Ching !
Attached image(s)
do we have some pricing for both the deep 6" and flat 6" for comparison?
is it true that "heart" are all deep 6"?
Thanks
I have a set of both. MY deep six with hearts are polished which I do not prefer, but they are worth more than my flat sixes that are original and anodized.
I run the flat sixes daily.
They both fit the same and I like the look. Pricing really depends on finish quality. But if you really have a nice set of deep sixes, you will love the look.
To me the original anodized petals with black background can not be beat.
Yes, there are deep sixes made by Fuchs without hearts.
Mine have hearts and are all date matched 8/69.........RSR finish
Yes they are OEM Deep sixes with hearts for $400 I could not be happier !
Greg
what year is your -6 and how correct do you want it ?
the dividing date for the deep/flat wheels is 26 March 1971 according to the workshop manual so the -6 show car guys are understandably keen to get hold of the correct wheels
My understanding is the hearts were on the '69 MY 6" wheels only and deep non hearts thereafter
Another thing to consider is the flats have a safety lip to assist with a flat tyre staying on the rim
The deeps don't have this lip and in the technology of the day would have had a tube.These days,so my suspension guy tells me,modern tyres are not designed with a tube in mind and might overheat
I had to decide this on my recent 2.2 S
I got around this with my 914-6 by changing from 5.5" x 14 deeps to 6" x 15 flats with 195/65s and noone here can tell the difference unless they really know 914s
HTH
Dennis
15" Fuchs were never an option an a standard 914 6
14" Fuchs were optional.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)