Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ OT

Posted by: Elliot Cannon Aug 16 2017, 06:12 PM

You So. Cal. peeps might remember THOMAS from Germany. He is in the states on vacation with his niece and stopped by our place in Paso Robles. THOMAS was a fixture at most of the west coast events. He finally decided to go home to Germany and he has another 914 now. He promised to be a little more active on the web site and he said he would now that he has a 914 again. biggrin.gif (Our good friend Sean Connery standing on his right).


Attached image(s)
Attached Image

Posted by: Steve Aug 16 2017, 06:16 PM

Great guy. I swung by his machine shop years ago to have him shave down my shift rod for the PMS firewall bearing. He wouldn't take any money to do it.

Posted by: euro911 Aug 16 2017, 06:48 PM

T H O M A S sent me some PMs a while back saying he was planning to visit ... not sure when he's scheduled to drop in to the So Cal area ... I'll shoot him a PM type.gif

It'll be great to visit with him again ... we (Dianne & I) miss the old bearded fart rolleyes.gif

Sean Connery's come and gone ... Daniel Craig is the new Bond poke.gif

Posted by: 914_teener Aug 16 2017, 06:58 PM

Good to see!

Ah ser gut.

The Haloween Runs were fun.

Posted by: Elliot Cannon Aug 16 2017, 07:17 PM

QUOTE(euro911 @ Aug 16 2017, 05:48 PM) *

T H O M A S sent me some PMs a while back saying he was planning to visit ... not sure when he's scheduled to drop in to the So Cal area ... I'll shoot him a PM type.gif

It'll be great to visit with him again ... we (Dianne & I) miss the old bearded fart rolleyes.gif

Sean Connery's come and gone ... Daniel Craig is the new Bond poke.gif


Sean Connery will ALWAYS be, "Bond, James Bond". biggrin.gif

Posted by: 76-914 Aug 16 2017, 07:18 PM

In the classifieds, I had offered to buy a slider inorder to make a locking tool for the tranny. That weekend when I went to an early G&R event Thomas walked up and handed me one. He wouldn't accept payment and did not know me from Adam. Good guy. My nephew moved back to Germany, too! beerchug.gif

Posted by: euro911 Aug 16 2017, 07:25 PM

QUOTE(76-914 @ Aug 16 2017, 06:18 PM) *

In the classifieds, I had offered to buy a slider inorder to make a locking tool for the tranny. That weekend when I went to an early G&R event Thomas walked up and handed me one. He wouldn't accept payment and did not know me from Adam. Good guy. My nephew moved back to Germany, too! beerchug.gif
'LIKE'

That's T H O M A S for ya first.gif

Posted by: SirAndy Aug 16 2017, 08:04 PM

QUOTE(Elliot Cannon @ Aug 16 2017, 05:12 PM) *
You So. Cal. peeps might remember THOMAS from Germany.

He looks a bit dry ...
laugh.gif

Posted by: euro911 Aug 16 2017, 08:17 PM

laugh.gif a bit? ...

Posted by: jim_hoyland Aug 16 2017, 08:22 PM

Good to hear. THOMAS helped me many times with my 924, organized the Holloween Runs, and made all Joe Sharps Bar-B-Ques. Those were some of the best times ! smile.gif

Posted by: Mike D. Aug 17 2017, 05:31 PM

Hi T H O M A S ! bye1.gif

I still have a Thomas built transmission in my garage... waiting... smile.gif


Posted by: euro911 Aug 17 2017, 06:15 PM

QUOTE(Mike D. @ Aug 17 2017, 04:31 PM) *
Hi T H O M A S ! bye1.gif

I still have a Thomas built transmission in my garage... waiting... smile.gif
I have three piratenanner.gif ... one side-shifter in the 'BB', the tail-shifter that came out of Dianne's 71, and another side-shifter that's going into the '71 when the new 1.9L goes in.

T H O M A S only charged me $60 for rebuilding the tail-shifter, but only because it needed a new 1st gear and associated synchros, IIRC pray.gif

The other trannys only needed new seal/gasket kits that I purchased from Pelican.

Posted by: Steve Aug 22 2017, 07:14 PM

Saw Thomas and his Niece at Diablo's in Vegas. What a treat, visiting Vegas racer in his natural habitat and running into Thomas and his Niece. Vegas Racer aka JP will be posting a pic later.

Posted by: ndfrigi Aug 22 2017, 07:21 PM

Transmission on my last 75 1.8FI I bought from a member built by Thomas and still running or shift smoothly.

Posted by: VegasRacer Aug 22 2017, 09:45 PM


Steve had sent me a PM saying he was coming to Vegas for business, so I was expecting to see him at Diablo's today.
We were both delightfully surprised when Thomas and his niece stopped by on their last day before returning to Germany.

Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)