Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Car going in the shop this week

Posted by: StratPlayer Jul 5 2003, 03:35 PM

Its almost time for my trip with the teener, car is going in a having new cam, lifters etc. When the engine was rebuild about 5K ago, the rebuilder talked me into hyd. set up,, cam, lifters, push rods.

Well enough time has past and I'm not happy with that setup so back with the orginal set up. Car should be ready for my trip the Pacific NW at the end of this month.

Posted by: tryan Jul 5 2003, 05:24 PM

not enought bottom end with the hydro lifters?

Posted by: Aaron Cox Jul 5 2003, 08:04 PM

what are the benefits of solid lifters and cams, vs, hyd. lifters and cams.

hyd = less noise right?

Posted by: StratPlayer Jul 6 2003, 12:47 PM

Reasons for the change,,, don't get me wrong the car runs very good, but suddenly when I stop for a light and the car comes to an idle, the lifters are very noisey, something is going on. I'll know more this week when we get the engine apart and get a good look at whats been happening.

So as soon as I get some kind of feedback on the motor I will keep you posted on whats going on.

I kinda want the engine the way it is supposed to be, and my mechanic agrees. So it will be done this week.

Posted by: StratPlayer Jul 21 2003, 02:02 PM

Follow Up:

Just got back from the shop, good thing that I decided to go back to the solid lifters and cam set up. This what we found, this is a hyd. lifter. Piece came out an the clip that holds it in was still in there but all bent out of whack

Posted by: StratPlayer Jul 21 2003, 02:05 PM

forgot picture argh

Attached thumbnail(s)

Posted by: Brad Roberts Jul 21 2003, 02:08 PM

Yep. happens when they are not adjusted correctly... or you over rev the engine.

B

Posted by: Aaron Cox Jul 21 2003, 02:09 PM

i know what a hyd. lifter looks like- i just want to know what the peformance / operation differences are