Printable Version of Topic

Posted by: Mikey914 Sep 23 2017, 12:15 AM

Package for ALL the late side shifter bushings for $20

1 -911.424.139.00 ball cup
http://shop.914rubber.com/91142413900-Ball-cup-for-shifter-at-transmission-91142413900.htm

1-914.424.224.02 trans mount bushing
http://shop.914rubber.com/Late-side-shifter-bushing-for-transmission-mount-91442422402-91442422402.htm

1-914.424.224.03 firewall bushing
http://shop.914rubber.com/91442422403-late-side-shifter-Firewall-bushing-91442422403.htm

1- 91442423902 side shift bellows
http://shop.914rubber.com/914-late-side-shifter-bellows-914SHRB.htm;jsessionid=B991C445BFD49115F68BB7750D20E871.p3plqscsfapp006

2-911 424 223 03 shift knuckle bushings
http://shop.914rubber.com/searchquick-submit.sc?keywords=Knuckle

I'll also offer the ability to add the cover and band for another $20 if you add to the GB $40 total)

Only catch need 10 takers for a GB.
I'll post up a thread.
Mark


Attached thumbnail(s)


Attached image(s)

Posted by: Mikey914 Sep 23 2017, 12:20 AM

Option to add these for $20

Also will run a few other GBs that can be combined to save a few bucks.

So,
Who's in?


Attached image(s)

Posted by: nditiz1 Sep 23 2017, 04:05 AM

I do need the cover so I'm in for 40

Posted by: dlee6204 Sep 23 2017, 04:58 AM

I'm in for everythig

Posted by: JOEPROPER Sep 23 2017, 06:29 AM

I'm in for everything too. Thanks.

Posted by: campbellcj Sep 23 2017, 06:52 AM

1 full kit with cover please

Posted by: markhoward Sep 23 2017, 08:05 AM

Im in

Posted by: mobymutt Sep 23 2017, 09:48 AM

Is there supposed to be a bellows at the firewall too, to protect that bushing? I'd be in if I can get that as well. I already have the large cover, but I need the band still.

Posted by: 87m491 Sep 23 2017, 09:54 AM

In for all bits

QUOTE(Mikey914 @ Sep 22 2017, 10:15 PM)

Posted by: Jett Sep 23 2017, 10:02 AM

I’m in for the entire set ($40)

Posted by: moe Sep 23 2017, 10:56 AM

I'm in for the $40

Posted by: Mikey914 Sep 23 2017, 11:03 AM

QUOTE(mobymutt @ Sep 23 2017, 08:48 AM)

Posted by: mobymutt Sep 23 2017, 11:29 AM

QUOTE(Mikey914 @ Sep 23 2017, 01:03 PM)

QUOTE(mobymutt @ Sep 23 2017, 08:48 AM)

Is there supposed to be a bellows at the firewall too, to protect that bushing? I'd be in if I can get that as well. I already have the large cover, but I need the band still.

there is, haven't made that yet, but I will soon.

Posted by: 914_teener Sep 23 2017, 11:42 AM

I need the bushing kit. My cover is good.

Thanks Mark.

Posted by: Mblizzard Sep 23 2017, 01:27 PM

I have all of these parts new from you Mark. But i encourage everyone to by a complete set along with some cone screws and and keep them in your car.

Can't find these when they fail and you need them. Very cheap insurance.

I am in. I have your cover and it is perfect!

Posted by: seanpaulmc Sep 23 2017, 03:33 PM

I'll take a bushing kit.

Posted by: wysri9 Sep 23 2017, 04:54 PM

Mark

I am in for the full $40 kit please!

Posted by: Calwaterbear Sep 23 2017, 05:08 PM

Hey Mikey,

when are you going to take pity on us guys with the old style crap.

Just pulled the whole shift mechanism, need to replace all the bushings , hoping you have a kit.

Posted by: Mikey914 Sep 24 2017, 08:28 AM

I do have the bands at the firewall and I need to do the ball, the housings and the firewall bushing. But yes I will do these.
Mark

Posted by: Calwaterbear Sep 24 2017, 09:09 AM

QUOTE(Mikey914 @ Sep 24 2017, 07:28 AM)

Posted by: mlindner Sep 24 2017, 12:49 PM

Mark, I'm in for every thing @40.00 plus any shipping you need. Best, Mark

Posted by: Highland Sep 24 2017, 12:54 PM

I'd like to be part of the GB with cover and band.

Posted by: Mikey914 Sep 24 2017, 07:27 PM

QUOTE(Calwaterbear @ Sep 24 2017, 08:09 AM)

QUOTE(Mikey914 @ Sep 24 2017, 07:28 AM)

I do have the bands at the firewall and I need to do the ball, the housings and the firewall bushing. But yes I will do these.
Mark

Can I assume you are replying to my request about early kits?
If so, any idea of a time frame?

Posted by: flat4guy Sep 24 2017, 08:01 PM

I have not looked into this yet but I am sure it will tighten up the shifter - how hard is the bushing set to replace?

Posted by: Mikey914 Sep 25 2017, 01:36 AM

The knuckle one is the most difficult. It helps to have a press, but you can get creative with a vice. I could look at an exchange, but only have one handy right now.

Mark

Link to my install
http://www.914world.com/bbs2/index.php?showtopic=301739&hl=shift+knuckle++bushongs



Attached image(s)

Posted by: Mikey914 Sep 25 2017, 01:39 AM

I'll be sending PMs out shortly -
I have 3 GB items that are possible to combine

-This shift bushings GB
-GB for Mirror - Late
-GB for the positive terminal block that will be launching tonight

Posted by: rhodyguy Sep 25 2017, 10:54 AM

In on the bushing package. No cover, mine and the SS clamp are fine. But not the bellows. I'll phone it in. Kudos to the team @ 914rubber!

Posted by: Mikey914 Sep 25 2017, 06:37 PM

Pms with codes sent to all at this point. I have included the GB information for the other threads, so if you signed up for more than one you may see a duplicate, I'll try to eliminate duplication.
Thanks,
mark

Posted by: Grosbard Sep 25 2017, 08:27 PM

Great stuff! Assuming a '73 is "late", then i'm in for the full bushing set.

Posted by: Mikey914 Sep 26 2017, 09:37 PM

If you have this on your trans it's what you need. Hard to tell as many have been retrofitted.


Attached image(s)

Posted by: NoEcm Sep 26 2017, 10:10 PM

Count me in for a set of bushings.

Posted by: koozy Sep 27 2017, 12:35 AM

Count me in for it all

Posted by: porbmw Sep 27 2017, 10:28 AM

Hi Mark

Can you put me down for the "complete kit" on this...
And when the time comes for the "early kit"...I will join the line!

Thanks
Paul

Posted by: clapeza Sep 27 2017, 01:02 PM

I'm also in for the early stuff when it becomes available. I definitely need the hard plastic cover and the bellows.

Posted by: Mikey914 Sep 27 2017, 11:19 PM

QUOTE(clapeza @ Sep 27 2017, 12:02 PM)

Posted by: Matty900 Sep 29 2017, 12:13 AM

QUOTE(flat4guy @ Sep 24 2017, 07:01 PM)

Posted by: Matty900 Sep 29 2017, 12:15 AM

Attached thumbnail(s)

Posted by: 87m491 Oct 3 2017, 06:48 AM

Hi Mike,
I am having trouble catching up on these GB's. I am on 914world only occasionally and it seems luck when I catch these. I responded that I would be in for all the bits mentioned. I rec'd a PM later with GB #'s that I missed. I would be easier just to be invoiced once I committed to the buy. Conversely if you send a code, I should be able to go to the web site, punch it in and buy the bits. I put the code in your search bat and crickets.
Am I supposed to add all the items to the cart then go coupon code? While I really do appreciate the offers and have participated before, it seems tougher than needs to be to follow the dots.
Mike

QUOTE(Mikey914 @ Sep 22 2017, 10:15 PM)

Posted by: NS914 Oct 3 2017, 07:34 AM

Mark

I am in for the full $40 kit please! I can't thank you enough for supporting our addiction!

shall I just give you a call and give you my Visa number?

Regards,

Grant

Posted by: mmichalik Oct 3 2017, 11:54 AM

If it's not too late, I would like to be in for everything as well.

Please let me know.

Thanks,

Mike