Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ ** Need some help ** - Updated
Posted by: KaptKaos May 23 2005, 12:48 PM
http://www.914world.com/bbs2/index.php?act=ST&f=2&t=31664
Thanks for all that have offered help with this.
What I may have here is a self inflicted wound. According to the mechanic (and I need to go see this), it looks like the the clutch cable that I put in we routed improperly. Somehow it was sitting on top of the brake line. I replaced the clutch cable probably 10-12 months ago and it seems to the mechanic that it has sawed through the hard line.
I will go to see this later, but I was wondering if anyone has seen or heard of this? I thought that the clutch cable was jacketed, so I am not sure how I got the braided metal of the cable sawing on the brake line.
Any one seen or heard of this?
Thanks,
Joe
Posted by: Headrage May 23 2005, 12:55 PM
Is the line abraded in the center tunnel? IIRC, the cable is only jacketed from the firewall to the tranny.
Posted by: Jeff Bowlsby May 23 2005, 01:27 PM
| QUOTE |
| Any one seen or heard of this? |
It could easily happen. An inspection mirror is essential to avoid wrapping the throttle or clutch cables aropund either each other or the hard brake line at the front of the center tunnel.
Sorry to hear of your trevails. I guess you now need to replace that hard line.
Posted by: ematulac May 23 2005, 06:09 PM
| QUOTE (Headrage @ May 23 2005, 11:55 AM) |
| Is the line abraded in the center tunnel? IIRC, the cable is only jacketed from the firewall to the tranny. |
I just put in a new Terry clutch cable yesterday, and was surprised to see that it wasn't jacketed from the firewall to the clutch pedal. But My old cable *did* have a jacket.
Gonna have to go back and check to make sure it's not 'sawing' through anything.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)