Can somebody tell me what size and type of screw to use for the 4 bottom holes and ferrules of the back pad?
Thanks,
Buck
Hay Buck
They are Phillips head self tapping sheetmetal screws, if the "ferrules" are the stand offs the screw protrudes about 1/2 in maybe a few mm more.
Sorry, no one has given you the definitive answer yet.
From what I can tell, they would be a M5.5x25 sheet metal screw.
You can buy these from places like Belmetric or McMaster-Carr or a local quality hardware store.
I've got 4 spare screws if you need them.
They are in usable condition.
Deja vu...
I asked the same question. After getting the “correct” answer, I tried that size and couldn’t grab threads. I just randomly tried a Sheetrock screw I had a box of on the shelf and it fit like a glove!
I know we were going to include with the new back pads, so I know Matt has the answer, I'll ask him to post up.
MArk
I have the AA Interior hardwear kit and it states M5.5 x 25 for the back pad screws.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)