Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Anybody know best way to contact Bowlsby

Posted by: bd1308 May 24 2005, 12:02 PM

I'm sick of dicking with my OE harness.....I want a rebuilt one......does he have a ecomm site or......his e-mail doesnt work though

Posted by: Aaron Cox May 24 2005, 12:07 PM

you try a PM?
or his website?

Posted by: Carl May 24 2005, 12:12 PM

I sent him an email to check this thread. He's a busy guy.

Posted by: tat2dphreak May 24 2005, 12:38 PM

I for one want to thank you for getting rid of the grunting panda avatar... I guess he finally took that crap he was having trouble with...

Posted by: Mueller May 24 2005, 12:42 PM

if you do get a harness from him, leave it alone...don't do what another member here did and take the thing apart and solder the connections

most excellent product, I bought one from him a few years ago...too bad he doesn't make one for using the Link ECU otherwise I'd buy it in a heartbeat....

Posted by: Jeff Bowlsby May 24 2005, 01:31 PM

Hey Guys...I'M BAAACKKKKKKK....

Sorry for the delay in response...I was away for the last 10 days and am still trying to come up for air...

So Mike...PM me with who it was that soldered the connections...first I have heard of it... I would be more than happy to either do or refine a LINK harness for you bro...I am looking for opportunities to fab 914 harnesses for aftermarket EFI...MS, LINK, SDS...

Posted by: Mueller May 24 2005, 01:46 PM

QUOTE (bowlsby @ May 24 2005, 12:31 PM)
Hey Guys...I'M BAAACKKKKKKK....

Sorry for the delay in response...I was away for the last 10 days and am still trying to come up for air...

So Mike...PM me with who it was that soldered the connections...first I have heard of it... I would be more than happy to either do or refine a LINK harness for you bro...I am looking for opportunities to fab 914 harnesses for aftermarket EFI...MS, LINK, SDS...

Hey Jeff....I thought it was our own DD

Was it not??? Maybe he attepted to do that mod to his original.....

As for the Link.....I know there is 1 other person for sure that's going to need a harness (Randal) and there is a 90% chance that a fellow 914'er down in So-Cal is going to go this route as well....

Posted by: xsboost90 May 24 2005, 02:22 PM

i wouldnt mind putting a new FI harness on my 76 2.0 sometime soon. Mine is just so brittle and pieced together.

Posted by: bd1308 May 24 2005, 02:28 PM

if Jeff makes a MS harness for the 914...count me in for one.

Posted by: Mueller May 24 2005, 02:31 PM

QUOTE (bd1308 @ May 24 2005, 01:28 PM)
if Jeff makes a MS harness for the 914...count me in for one.

the MS harness should be easy for Jeff....my old MS harness is complete (yet ugly ), so I can give it to him to look over.....

Posted by: Aaron Cox May 24 2005, 02:37 PM

britt. you said you wanted to stop dicking with your motor. so why would you ask for megasquirt?

Posted by: Rouser May 24 2005, 02:43 PM

QUOTE (Aaron Cox @ May 24 2005, 04:37 PM)
britt. you said you wanted to stop dicking with your motor. so why would you ask for megasquirt?

Yep, scratching my head on that one, too ...

Posted by: Mueller May 24 2005, 02:45 PM

so he can do this

Attached image(s)

Posted by: Aaron Cox May 24 2005, 02:48 PM

QUOTE (Mueller @ May 24 2005, 01:45 PM)
so he can do this

mike. how are you going to make those into a 'single unit' ie mate the Tb's with the shorty manifolds.

and BTW- why you ising shorties?

Posted by: bd1308 May 24 2005, 03:24 PM

QUOTE (Mueller @ May 24 2005, 02:45 PM)
so he can do this

you read my mind those look sweet!

Posted by: Mueller May 24 2005, 03:45 PM

QUOTE (Aaron Cox @ May 24 2005, 01:48 PM)

QUOTE (Mueller @ May 24 2005, 01:45 PM)
so he can do this

mike. how are you going to make those into a 'single unit' ie mate the Tb's with the shorty manifolds.

and BTW- why you ising shorties?

see my updated post

I went with shorties for a few reasons...1st was I found them dirt cheap, I didn't know there are different sizes and luckly, Jake said they are perfect for my application