Posted by: pgollender Nov 14 2017, 07:24 PM
Got my heads back from machine shop and noticed these 4 defects in the outer jug seat:
Additionally there is a chip missing near the spark plug hole. The other head is perfect.
What can I do to fix it ?
Weld and regrind ?
Posted by: porschetub Nov 14 2017, 07:34 PM
QUOTE(pgollender @ Nov 15 2017, 02:24 PM)
Got my heads back from machine shop and noticed these 4 defects in the outer jug seat:
Additionally there is a chip missing near the spark plug hole. The other head is perfect.
What can I do to fix it ?
Weld and regrind ?
all good don't worry you are fine
,those marks have no effect on your rebuild ok.
Posted by: worn Nov 14 2017, 08:30 PM
QUOTE(pgollender @ Nov 14 2017, 05:24 PM)
Got my heads back from machine shop and noticed these 4 defects in the outer jug seat:
Additionally there is a chip missing near the spark plug hole. The other head is perfect.
What can I do to fix it ?
Weld and regrind ?
I don’t think that is a defect in the sealing surface. But it has been a few years since I did mine.
Posted by: jd74914 Nov 14 2017, 10:45 PM
I would smooth out the chip in the chamber so you don't get a hot spot there. No need to reweld/machine IMHO. I'm a little surprised the shop didn't do that little bit of smoothing though.
Posted by: McMark Nov 15 2017, 12:25 PM
No sealing on that surface. That material was removed so it wouldn't hit the cylinder fins.