Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Value of vw/porsche engine yoke?
Posted by: mb911 Nov 18 2017, 08:17 PM
I know that most hate the whats it worth thread but I nees to clear some things out of the shop I don't need and can't find much info on these.. Help? Part numbers are shown..any help would be appreciated.. It is very heavy duty did my 3.2 ss turbo on it.. 
Posted by: mb911 Nov 18 2017, 08:18 PM
Posted by: Mueller Nov 18 2017, 08:55 PM
Not cheap at Pelican!
http://www.pelicanparts.com/cgi-bin/ksearch/PEL_search_2016.cgi?command=DWsearch&description=engine+stand
I need one, but cannot justify anywhere near those prices for something I might only use once.
Posted by: mb911 Nov 18 2017, 09:22 PM
Not cheap at Pelican!
http://www.pelicanparts.com/cgi-bin/ksearch/PEL_search_2016.cgi?command=DWsearch&description=engine+stand
I need one, but cannot justify anywhere near those prices for something I might only use once.
Looks like new it could be as much as a 600 dollar combo..
Used has to much less. Mine is probably 30 years old.. I bought it used 20 years ago..
Posted by: Mueller Nov 18 2017, 09:37 PM
I'm guessing the cutout on the tab on the left hand side is for the tool that holds the flywheel from spinning?
Posted by: rgalla9146 Nov 18 2017, 09:56 PM
I'm guessing the cutout on the tab on the left hand side is for the tool that holds the flywheel from spinning?
Yes, and it's reversible to fit Porsche 12 v or VW / Porsche 6 v flywheels....if...
you have it !
Posted by: Mueller Nov 18 2017, 09:59 PM
I'm guessing the cutout on the tab on the left hand side is for the tool that holds the flywheel from spinning?
Yes, and it's reversible to fit Porsche 12 v or VW / Porsche 6 v flywheels....if...
you have it !
^Neat, there is really cheap looking VW yoke and stand on local CL right now for $80, too bad it is 1.5 hour away one way ... don't think I'd trust this cheaper one with a /6 engine for sure (listed as VW Type I and 912)
Posted by: r_towle Nov 18 2017, 10:35 PM
That looks like a vw yoke.
The Porsche yokes I have seen have more than two arms
Posted by: burton73 Nov 18 2017, 11:26 PM
EBay 5 arm stand for $130 with shipping. Someone could buy a roll stand from a local store for cheep. That is what I did no my last rebuild. The 6 eng did not fall down.
So what is yours worth? If a guy was a pro he would have a good one like yours 
Bob B
Posted by: mb911 Nov 19 2017, 06:04 AM
That looks like a vw yoke.
The Porsche yokes I have seen have more than two arms
I am not sure as I had not seen 5 arm ones until semi recently..
I wonder if ebay maybe the best way to find value?
Posted by: infraredcalvin Nov 19 2017, 06:14 AM
For reference, i just bought a 5 arm P201 along with a used harbor freight engine stand for 200 on the bird not too long ago , I think it was a good deal. I didn’t realize the “new”prices had gone up that much, for some reason I remember a new five arm costing around 275-300.
Posted by: mb911 Nov 19 2017, 07:00 AM
For reference, i just bought a 5 arm P201 along with a used harbor freight engine stand for 200 on the bird not too long ago , I think it was a good deal. I didn’t realize the “new”prices had gone up that much, for some reason I remember a new five arm costing around 275-300.
Thanks I just came up with a price of 325 in the classifieds and 375 on the bird board. We will see what happens.
Posted by: mepstein Nov 19 2017, 07:19 AM
It’s a great deal. Buy it, use it and then sell it for what you paid.
Posted by: bdstone914 Nov 19 2017, 07:58 AM
There is an $80 one nut it is not made right and you can not install all the tin on a Type IV motor with out interference. The expensive one is made correct. I have the cheap one and it works.
Posted by: mb911 Nov 19 2017, 12:33 PM
I posted for sale on pelican and sold right away so I guess it was too cheap but either way I am happy for the help..
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)