visited the bodyshop today...
didn't take too many pics cause the battery of my camera died on me
I'll have to go back next week and shoot some more
Not too visible in these shots is the new inner half longitudinal that's welded in (driver side)
(you can see some of it in pic 4 & 5)
Sadly, I don't think the welder understood the concept of the stampings in the driver side inner rear fender (mounting positions for the oil tank - pic 1)
The PO made some crappy repairs there so I got a replacement panel (thanks again Larry / Spare-time-toys)
But he still welded some additional metal over it...
I don't think the /6 oil tank will fit this way
I'll have to talk to him about that
I'm very happy with the other repairs
awsome! I know when mine was there i was wishing someone would do it for me.
Lookin good!
hope you'll get the holes for the oiltank figured out.
give me a holler if you need any help in the near future.
Wish I had the teener in Delft, the weather is unbelievable!
have a cold one I know I will
greets
Jacco
jeroen, My cousion and her better half are coming over to Boston tomorrow for a week and a half..is there anything I could get for you with the great exchange rate right now for you and have them bring it back over?
I work at a Porsche dealership, and my cuz lives in Amsterdam...actually, my mom's sides of the family is all over there..she was born and raised in Rotterdam. I can't keep track of all the cousins..they either live in Amsterdam or Norweijk (sp?)...in the north where Heinekin's house is..you know the one with the green roof. Anyway...just thought I'd mention it
Eric
That's good looking work Jeroen. Finally bit the bullet and getting her finished eh?
You gotta love shiny new metal!
Way to go, Jeroen.
Looks great did you have your chasse media blasted? If so what media did you use.
Regards,
Turbo Paul
This is really... Really... great!
brant
Wow. looks good! Haha, next time you come back from vacation, charge the camera batteries.
Jacco, you missed out on the weather in Seattle as its 85-90 degrees these days!!
Looks like we might be going the Nederlands in Oct for a visit so I can also bring parts to you.
Eric, thanks for the offer...
Due to the crappy vacation, the 914 parts budget is kinda limited right now
I live about 30 min. south east of Rotterdam (I was born there too)
Geoff, Jacco doesn't have to worry about the Seattle weather now
I broughts some nice hot weather with me when I returned from Cyprus
QUOTE |
That's good looking work Jeroen. Finally bit the bullet and getting her finished eh? |
QUOTE |
Looks great did you have your chasse media blasted? If so what media did you use |
Hey Partsman (Eric)
Can you give me the hookup for the oem stuff I need for my racecar. I live in SE mass and am tired of getting porked. Only need gaskets and so forth.
Erik Madsen
QUOTE (Jeroen @ May 27 2005, 04:35 PM) |
Due to the crappy vacation, the 914 parts budget is kinda limited right now |
QUOTE (Jeroen @ May 27 2005, 04:35 PM) |
I broughts some nice hot weather with me when I returned from Cyprus |
QUOTE (Bleyseng @ May 27 2005, 02:12 PM) |
Jacco, you missed out on the weather in Seattle as its 85-90 degrees these days!! Looks like we might be going the Nederlands in Oct for a visit so I can also bring parts to you. |
Ok, so I went back to day with a fully loaded battery
First 2 pics show the outer half of the drivers side longitudinal removed
As you can see, the support plate underneath the doorjamb/windshield frame in the middle of the long has been replicated
Pic 3 shows the replacement piece for the outer long half, about ready to be welded in
Pic 4 shows the new inner half of the long
the cut-out for the handbrake won't be there anymore
planning for a handbrake handle on the center tunnel
5th pic shows a new "Y" piece from the inner long to the bottom of the firewall on the pass side
Also some of the DAPO crappy repairs
(will be fixed later)
6th pic shows the same part on the drivers side
last pic shows the sawzall part from Larry welded in to place
also the bottom corner at the firewall has been patched (looks funny in the pic, but it's done nicely)
Yaroon:
Somewhere in my pile of shittage I have a paper template of the hole layout for the stock tank. You're welcome to it....if you feel the need.
nice flintstone car! '
Looking good
So looking at the first batch it looks like the guy welded patches on the backside of what I sent you It looks good in there though.
QUOTE (spare time toys @ May 31 2005, 01:50 AM) |
So looking at the first batch it looks like the guy welded patches on the backside of what I sent you |
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)