Printable Version of Topic

Posted by: n2j2ryan Dec 23 2017, 10:41 PM

A little bit of damage repair. [attachmentid=632430]

Posted by: bretth Dec 24 2017, 08:16 AM

Nice work. Please be careful with those jack stands, they can fail if you accidentally hit the levers on them. Pin type stands are better. At least get some blocks of wood under there as a backup.

Posted by: 914350 Dec 24 2017, 10:06 AM

Big repair, way cool.
I like that Shaker Cuda/Barracuda Conv. In the background.

Posted by: cn2800 Dec 25 2017, 01:08 AM

Are all left front quarter donor cars yellow?

Posted by: Blue6 Dec 25 2017, 01:24 AM

If it's going on a wht car, it's required to be ylw...

Posted by: mb911 Dec 25 2017, 10:24 AM

My car has the other yellow side done by p.o. and now I need to correct it..

Posted by: n2j2ryan Dec 25 2017, 01:37 PM

Yes, this is what the P/O did to my car, and then covered it with about 20 lbs of bondo.

Posted by: n2j2ryan Dec 25 2017, 01:42 PM

Twins for sure!

Posted by: mb911 Dec 26 2017, 08:32 AM

Wow.. I have straightened mine out with some heat and hammer and dolly. Now to cut the brazing out.. Mine was a yellow replacement section before I removed the paint..

Posted by: Cairo94507 Dec 26 2017, 06:29 PM

Uhhh.... I have nothing to say.