Just a note, in the infos section more specifically in the http://www.914world.com/specs/bodydims.php?PHPSESSID=1b5fb0aaaee0fc4fee85242d39121b4b section, some of the measures are erronated, for example X which is the diagonal distance from roll bar to roof is stated as 1997mm and it should be 1337mm, same thing for the letter m which is the distance across the windshiel frame 1711 vs. 1171mm. There may be others but I didn't check them all. Just passing along the note as this info will get more and more important with time or rust shoul I say! Thanks
QUOTE (mihai914 @ Jun 1 2005, 07:18 PM) |
There may be others but I didn't check them all. |
QUOTE (SirAndy @ Jun 1 2005, 10:21 PM) |
daaaaaave .... |
Hope you didn't get those measurements off the car in your avatar!
No, I think he got that car from using the measurements!
M
Well, I see three options in fixing this issue.
1. Take the info from PP, which is still Dave's.
2. Someone should have the picture and data in a factory shop manual.
3. Someone crazy enough to strip a tub and start tanking measures.
I vote for 2, anyone, other options are welcome.
I've got a bare tub holding down my jackstands, but I don't have digital calipers that big.
I have the info from the shop manuals as well and dig into it a.s.a.p.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)